Search found 51 matches
- Mon Apr 26, 2021 12:40 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: new project
- Replies: 34
- Views: 10885
Re: new project
thanks for the direction and help i have started stripping the machine . i have brought the console home obviously it has nothing plugged in to it apart from power. this is a picture of the alleged new motherboard 283B6883-4F99-45A5-A7D1-9A1B2056247B.jpeg when i start it up i get this picture blank ...
- Sat Apr 24, 2021 2:18 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: new project
- Replies: 34
- Views: 10885
Re: new project
You can't drive SD3 with OAK. All in One DC is for DC brushed servo motors which you do not have. They are not an option unless you want to remove the servo motors and replace them. My opinion and .02 Marty thanks when i get to the position of what is staying and what isn't, ill be in touch im just...
- Sat Apr 24, 2021 2:47 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: new project
- Replies: 34
- Views: 10885
Re: new project
i have an m400 control rtk3 sd3 servo drive and servos i have started to dismantle the machine to start my journey for the rebuild . i need to know that if i don’t use all the systems on the original machine tool changer door lock ect that sort of thing will this throw up errors if they are removed ...
- Sun Apr 18, 2021 7:36 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: new project
- Replies: 34
- Views: 10885
Re: new project
thank you for the reply i had a quick look on eBay and these looked easy to mount and connect to does this look like a good base to build from adding the parts you suggest or can you recommend and all in one off the shelf unit . according to the drawing f6 is 15a ill check to see if mine is the same...
- Sat Apr 17, 2021 12:13 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: new project
- Replies: 34
- Views: 10885
Re: new project
I am going to assume that Centroid is thinking you are just using 2 legs of that rectifier input and putting single phase into the existing rectifier. DC is DC and the only variable should be how much ripple is in the DC. If you use the proper rectifier circuit, you will get clean DC output regardl...
- Fri Apr 16, 2021 3:19 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: new project
- Replies: 34
- Views: 10885
Re: new project
thanks marty/marc yes its 50hz here so the spindle drive/motor shouldn't be an issue then if i ended up replacing it. with something like this Yaskawa V1000 IP20 4kW 230V 1ph to 3ph AC Inverter Drive i guess the sd3 comes as part of the m400 package and its that or nothing ? so if i want to use it i...
- Fri Apr 16, 2021 2:33 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: new project
- Replies: 34
- Views: 10885
Re: new project
the supply to the rectifier is 220v 3 phase , i only have 240v single phase can this be configured differently or will i need another power supply. i read the sd3 manual and there was a line about matching supply with the motor voltage which according to the servo nameplate is 260v so my question is...
- Thu Apr 15, 2021 2:51 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: new project
- Replies: 34
- Views: 10885
Re: new project
got it
thanks
thanks
- Thu Apr 15, 2021 2:30 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: new project
- Replies: 34
- Views: 10885
Re: new project
thank you we have 220v here in the uk so 220v to the drive power input on the sd3 will drive the servo's ? in the rtk3 use the relays to switch on a 220v 3ph vfd to power coolant and another for the carousel? from memory im pretty sure the transformer was step down ,220,110,24v I was expecting not t...
- Thu Apr 15, 2021 1:10 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: new project
- Replies: 34
- Views: 10885
Re: new project
thanks today i managed to get a report zip from the machine before it is dismantled . the machine worked , was then stood unused for a time , had a new motherboard fitted with slightly different connections , it wouldn't start came up with errors the owner my friend had had enough and offered it to ...