Centroid Community CNC Support Forum

All, I am working of creating a complete info package to send including Wiring Diagram Pictures of the issue and the CNC machine Specs for components dip switch settings for stepper drivers report file report from the old machine I will post this all at once within a couple of days so everything is ...

So there could be nothing wrong with the CNC-12 config to cause an issue like this? I am working on getting the info for the system , but note that the only delta is the new NUC and CNC12 software and the rest of the electronics and hardware have been working flawlessly for years , I only upgraded t...

Also note that the workpiece was actually screwed down to the table to eliminate the possibility of slipping clamps

Hi, I have changed to the most recent CNC12, brand new NUC and getting some odd behavior that I haven't seen in the past This CNC uses NEMA 34 steppers, the wiring has not changed and I have done dozens of projects, the only delta is moving to the New NUC and to new CNC-12 version I am doing a simpl...

Hi Maybe I misunderstand what homing is, I thought that this would bring the spindle to the origin so that one can zero the axes It makes sense to home away from the x=y=0 position for loading I want to be able to set the x and y to zero so without jogging there every time I power up the machine I c...

Added missing diagram

Hi, I am starting from scratch after upgrading my PC to the recommended NUC I found information on programming the home and limit switches and this is not done yet before I do I want to make to ensure that I put the homing switches mechanically in the correct places Please see attached picture of th...

Hi ,
I upgraded my PC to an Intel NUC and need to move over all of the settings from the exist PC with centroid
I have installed the latest version of the centroid software

What is the easiest way to copy all of my hard earned settings to the new machine?
Thanks,
Wil

Hi. I'm just trying to understand here This is a homebuilt system that has been working great for around 3 years now, I just want to add hardware limit safety switches, since I'm going to bring in someone new to run the machine 1. The problem: limit_all does not seem to operate, 2. Configuration: a)...

Hi

I will resubmit