Search found 72 matches
- Sat Jun 03, 2023 12:23 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Spindle encoder issues continuation
- Replies: 2
- Views: 332
Spindle encoder issues continuation
I'm at a loss.... So, going back several months, I had a lathe that quit threading, rather started splitting leads. I verified that everything mechanically was in order, about 4 times actually. So, I decided to convert a larger South Bend lathe to cnc and simply get away from the Grizzly G9972Z alto...
- Thu Mar 30, 2023 4:23 pm
- Forum: Centroid Acorn CNC Controller
- Topic: spindle benc htest
- Replies: 3
- Views: 311
Re: spindle benc htest
No, there is no capacitor
- Thu Mar 30, 2023 2:50 pm
- Forum: Centroid Acorn CNC Controller
- Topic: spindle benc htest
- Replies: 3
- Views: 311
spindle benc htest
I started having trouble with my spindle on my Grizzly G9972Z lathe. I'm using a DuraPulse GS20X -22P0 VFD driving a 2hp motor. Occasionally the spindle would not shut off and I would reset the VFD and it would start up again. Today it did not work (resetting) so I started looking at everything. I d...
- Mon Dec 19, 2022 7:34 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Spindle encoder issues
- Replies: 5
- Views: 594
Re: Spindle encoder issues
No bent pins. I think I have a bad board. I can move the encoder to another board that I bought at the same time and it works.
- Sun Dec 18, 2022 10:41 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Spindle encoder issues
- Replies: 5
- Views: 594
Re: Spindle encoder issues
I'll pull the shroud and check. thanks!
- Sun Dec 18, 2022 8:29 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Spindle encoder issues
- Replies: 5
- Views: 594
Spindle encoder issues
I'm doing two builds side by side. Both lathes, same encoder, same DB10 connector, same cable, same laptops, both new Acorn boards (reports attached). Downloaded the software at the same time. Both encoders will work on board 5960 but neither will work on 5265. I used schematic S14976.r4 for the pin...
- Wed Nov 02, 2022 7:05 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Spindle encoder issues
- Replies: 4
- Views: 760
Spindle encoder issues
Acorn board 0C1C571289B6-0526203333 Schematic 15033 - Stepperonline CL86Y Spindle encoder Calt GH538 2000 PPR I mounted the encoder on the side of the head of my PM25 mill with timing pulleys and belt with a 1 to 1 ratio I had to splice a piece of cable to the original cable on the encoder for enoug...
- Tue Oct 18, 2022 10:35 pm
- Forum: Centroid Acorn CNC Controller
- Topic: 9031 Drive faut and probe issues
- Replies: 2
- Views: 432
Re: 9031 Drive faut and probe issues
I'm sorry. I'm using Stepperonline DM860T with NEMA 34 steppers
- Tue Oct 18, 2022 10:31 pm
- Forum: Centroid Acorn CNC Controller
- Topic: 9031 Drive faut and probe issues
- Replies: 2
- Views: 432
9031 Drive faut and probe issues
I received a new stylus for my KP3 today. It's been a while since I used the probe. Moved to the center of a bore, probed it, got the information that the probe was complete, unplugged the probe and got a "Probe Tripped" fault. Rebooted, restarted the software, probed another hole, same th...
- Wed Aug 24, 2022 9:30 am
- Forum: Centroid Acorn CNC Controller
- Topic: Probe issues
- Replies: 1
- Views: 500
Probe issues
My probe suddenly quit working. I verified the wiring, the inputs which I did not change but White goes to 6 and red to 7. Black is connected to a com port. Both of the lights are green on inputs 6 and 7. The probe connected, the probing cycle starts but the Probe light does not come on. Any suggest...