Search found 465 matches

by Joey
Thu Mar 21, 2024 11:59 pm
Forum: Acorn CNC Plasma
Topic: Issues with Torch Calibration
Replies: 17
Views: 245

Re: Issues with Torch Calibration

Are you at the machine now?
Are you available for a TeamViewer session?

Pin 5 -divided voltage from the the Hypertherm looks like it is connected to input 3 on the TX.

Also the fiber optic connection doesn't look promising
by Joey
Thu Mar 21, 2024 10:41 pm
Forum: Acorn CNC Plasma
Topic: Issues with Torch Calibration
Replies: 17
Views: 245

Re: Issues with Torch Calibration

Hi The THC is not happy and is maxed out. Plots are showing a constant high voltage. The very first plot shows the maxed out voltage also. What were the results of the THC bench test? Can you post pictures of the THC and cabinet wiring. What Plasma cutter are you running? I would not fire the torch ...
by Joey
Wed Mar 20, 2024 7:09 pm
Forum: Acorn CNC Plasma
Topic: MPG Plasma Lost RF
Replies: 22
Views: 1671

Re: MPG Plasma Lost RF

Bryan I've sent the Resync documents over via Email.

Let me know how you make out.

We can set up a TeamViewer time if the Resync is unsuccessful.
by Joey
Wed Mar 20, 2024 1:51 pm
Forum: Acorn CNC Plasma
Topic: Flickering screen
Replies: 26
Views: 10761

Re: Flickering screen

Another problem with homing. I have inductive sensors attached on the machine so i can home automatically. When press 'set xyz home' the controller gives message: 'Home tripped' and machine will not home until i move the axes away from sensors. So it would be nice that machine can home, even when s...
by Joey
Tue Mar 19, 2024 5:24 pm
Forum: Acorn CNC Plasma
Topic: instaled THC now loosing steps
Replies: 57
Views: 1376

Re: instaled THC now loosing steps

Jeff there are only 3 Motors on the Table currently.

I think number one is to Connect the Gantry and Table.
by Joey
Tue Mar 19, 2024 12:16 pm
Forum: Acorn CNC Plasma
Topic: instaled THC now loosing steps
Replies: 57
Views: 1376

Re: instaled THC now loosing steps

Brett Do you have a Grounding Wire Connecting the Gantry to the Table frame? Throw a heavy gauge Wire on that connects to the Gantry then runs thru the energy chain and Connects to the Table. Jeff colden sent me some pictures of his gantry connection to the Table. Resized_20240319_120858_17108645997...
by Joey
Sun Mar 17, 2024 8:43 pm
Forum: Acorn CNC Plasma
Topic: instaled THC now loosing steps
Replies: 57
Views: 1376

Re: instaled THC now loosing steps

Good point. Looks pretty consistent.


Check out the attached PDF.


Can you plasma cut a 4-10 inch circle and scribe the same circle beside the plasma cut circle to compare
by Joey
Sat Mar 16, 2024 9:39 pm
Forum: Acorn CNC Plasma
Topic: instaled THC now loosing steps
Replies: 57
Views: 1376

Re: instaled THC now loosing steps

Bret,

Can you throw a fresh report up.

Does the Table and the Plasma cutter run from the Same Breaker?
by Joey
Sat Mar 16, 2024 5:15 pm
Forum: Acorn CNC Plasma
Topic: Flickering screen
Replies: 26
Views: 10761

Re: Flickering screen

Jordy, Did you ever try a different PC? It really seems the PC has struggled even during Bench Testing. Is There anything else on the Current PC try and Wipe the PC and Run the PC Tuner. https://centroidcncforum.com/viewtopic.php?f=65&t=9498 Can you start A Google photo album and post detailed p...
by Joey
Sat Mar 16, 2024 4:41 pm
Forum: Acorn CNC Plasma
Topic: Torch Not firing during Test fire
Replies: 2
Views: 90

Re: Torch Not firing during Test fire

Hello Mark Just Loaded your report and (Torch On) in not assigned to any output in the Wizard. That would explain the torch not firing. :D No Output Assigned.png If you followed Schematic S15107 than assign (Torch ON) to Output 2 in The Wizard's Output menu. Mark Torch ON.png Should be a quick fix