first Draft Overall Installation Manual is attached.
comments and suggestions are welcome.
https://www.centroidcnc.com/centroid_di ... manual.pdf
Search found 7164 matches
- Mon Mar 25, 2024 5:57 pm
- Forum: Centroid Hickory CNC Controller
- Topic: CENTROID Hickory Install Manual?
- Replies: 12
- Views: 8481
- Sat Mar 23, 2024 6:37 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Acorn Zero Voltage on Spindle Bench Test <resolved, leads not making contact>
- Replies: 8
- Views: 239
Re: Acorn Zero Voltage on Spindle Bench Test
show us how you are measuring the analog out voltage from acorn.
- Sat Mar 23, 2024 2:19 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Program eratic after a tool change Lathe <resolved. CSS was too high>
- Replies: 26
- Views: 458
Re: Program eratic after a tool change Lathe
I had to simulate the tool changer. I did have the a-axis turned on and working but I didn't have a physical tool changer durig the test. On Monday I'll have the tech support guys run it on our in-house lathe to see if we can shed some light on your issue
- Sat Mar 23, 2024 2:18 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Please help with ATC issue after spindle and VFD upgrade
- Replies: 4
- Views: 98
Re: Please help with ATC issue after spindle and VFD upgrade
Number one thing is to upgrade to the latest version of software. The version you're running is very old. The new version has lots of pre-programmed features that you're after. Please follow the CNC12 installation instructions and guidance to the t and things will go smoothly
- Sat Mar 23, 2024 2:16 pm
- Forum: Centroid Acorn CNC Controller
- Topic: What's the minimum I need for a small lathe?
- Replies: 17
- Views: 342
Re: What's the minimum I need for a small lathe?
The encoder has to be at a one to one ratio. It's measuring position. You cannot have a smaller pulley on the spindle or vice verse. They have to be the same diameter. That's what one-to-one ratio means
- Fri Mar 22, 2024 4:34 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Strange lathe issue - only when boring
- Replies: 9
- Views: 170
Re: Strange lathe issue - only when boring
page 69 shows the id tool measurement process, good to review this
https://www.centroidcnc.com/centroid_di ... manual.pdf
https://www.centroidcnc.com/centroid_di ... manual.pdf
- Fri Mar 22, 2024 4:25 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Program eratic after a tool change Lathe <resolved. CSS was too high>
- Replies: 26
- Views: 458
Re: Program eratic after a tool change Lathe
i loaded your report and intercon test file on a test bed machine (without a spindle encoder) and i changed the intercon program to F/M and it seems to run fine, (not like the video short posted)
- Fri Mar 22, 2024 4:05 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Program eratic after a tool change Lathe <resolved. CSS was too high>
- Replies: 26
- Views: 458
Re: Program eratic after a tool change Lathe
when you say older program do you mean G code or Intercon?
please post the working program and a non working program
please post the working program and a non working program
- Fri Mar 22, 2024 3:57 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Z axis does what it wants...
- Replies: 3
- Views: 157
- Fri Mar 22, 2024 3:55 pm
- Forum: Success Stories
- Topic: Some recent stuff dialing everything in:
- Replies: 7
- Views: 540