Centroid Community CNC Support Forum

I would disconnect the divided voltage wires from the hypertherm going to the TX. Then rerun the THC bench test. Make sure hypertherm is off when running the THC bench test. If the hypertherm is powered on during the bench test. The test will cause the hypertherm to fire the torch. We just want to m...

Are you at the machine now?
Are you available for a TeamViewer session?

Pin 5 -divided voltage from the the Hypertherm looks like it is connected to input 3 on the TX.

Also the fiber optic connection doesn't look promising

Hi The THC is not happy and is maxed out. Plots are showing a constant high voltage. The very first plot shows the maxed out voltage also. What were the results of the THC bench test? Can you post pictures of the THC and cabinet wiring. What Plasma cutter are you running? I would not fire the torch ...

Bryan I've sent the Resync documents over via Email.

Let me know how you make out.

We can set up a TeamViewer time if the Resync is unsuccessful.

Another problem with homing. I have inductive sensors attached on the machine so i can home automatically. When press 'set xyz home' the controller gives message: 'Home tripped' and machine will not home until i move the axes away from sensors. So it would be nice that machine can home, even when s...

Jeff there are only 3 Motors on the Table currently.

I think number one is to Connect the Gantry and Table.

Brett Do you have a Grounding Wire Connecting the Gantry to the Table frame? Throw a heavy gauge Wire on that connects to the Gantry then runs thru the energy chain and Connects to the Table. Jeff colden sent me some pictures of his gantry connection to the Table. Resized_20240319_120858_17108645997...

Good point. Looks pretty consistent.


Check out the attached PDF.


Can you plasma cut a 4-10 inch circle and scribe the same circle beside the plasma cut circle to compare

Bret,

Can you throw a fresh report up.

Does the Table and the Plasma cutter run from the Same Breaker?

Jordy, Did you ever try a different PC? It really seems the PC has struggled even during Bench Testing. Is There anything else on the Current PC try and Wipe the PC and Run the PC Tuner. https://centroidcncforum.com/viewtopic.php?f=65&t=9498 Can you start A Google photo album and post detailed p...