Centroid Community CNC Support Forum

More specifically, use the forum search facility as I have just done. A search on "Firewall" would have brought up Keith's words of wisdom on the following link

viewtopic.php?f=60&t=3232&hilit=firewall

Unless I am missing something and you have used all available WCS depending on your licensing, why not allocate one (e.g. WCS6) just for the jig. Then you are ready to go as and when required but still retaining the flexibility of the other WCS settings for other work. Advantage is no programing req...

Sounds like the OP needs to review his security - Workshop CCTV, sensors, alarm, strong admin password, disconnected LAN etc. If he is that concerned perhaps surround the whole workshop with a full faraday cage

I have a similar question along this line. My machine rapid is way too fast to control with buttons at full speed. Does the feed rate override knob on the control panel slow rapid movement down as well or just cutting feed rate? My machine currently has a separate rapid speed override and feed rate...

The stock PPs for Aspire v10.509 attached as requested by Shawn

I'm using Aspire v10.5 and although I have slightly modified the CentroidArcs PP to suit my own requirements, the original was apparently dated 2007. It therefore goes back many iterations.

Perhaps Gary C can comment further

Thanks swissi, well noted. I had not considered shortening retraction distance but makes perfect sense

I have a 20mm Renishaw carbide/ ruby available for a specific job coming up and do not want to damage the Probe.

Am I correct in assuming Max fast feed rate of 30ipm needs reducing by 50% for 20mm stylus instead of standard 40mm length?. Slow speed unchanged of course

TIA

and post a current Report.zip so we see how your machine is configured