Centroid Community CNC Support Forum

Figured out what the problem was!!
The cable had an intermittent break in it.
REPLACED THE CABLE AND ALL IS FINE.

I have a two-year-old Next Wave Automation Model 20090 Touch Probe but can't get it to hook up to the Acorn Board. When I plug in the probe it shows the probe connected but when the probe is tripped the red light comes on in the probe but does not show any connection to the board. NWA says the probe...

I only have the movable one.
The cutting depth now appears to be working.
Thanks again for all your help.

ShawnM
I deleted the file that was copied into the mfunc44.mac file by Acorn and installed my backup version into the cncm directory and it seems to work great.
Thanks so much for all your help.

I will reinstall the original mfunc44 and go from there.
Thanks

Chris at Acorn copied the mfunc44.mac file into the mfunc44.mac file and I am using the Auto Z to plate button. Maybe that is why I am having a problem.
Should I reinstall the mfunc44.mac file from my original cncm backup?

I am using the Auto Z to plate button and Chris copied the M6funct program to the m44 button. I assumed it was the correct program.

Changed the Tool Touch-Off plate to a .375" Thick and run the test per Gary's suggestion. Measured the plate at .375 and then run the Z0 and it leaves a .215" gap between the plate and spoil board. The Wizzard shows .375 on the plate and Parm 71 shows .375 also. Tried the -.375 and no chan...

This is it one I downloaded (mfunc6router-manset.mac)

I am using the mfunc6.mac macro.