Search found 120 matches

by centroidsupport
Fri Feb 18, 2022 5:36 pm
Forum: Centroid Acorn CNC Controller
Topic: ATC issue with tool_unclamp_timeout on a router
Replies: 2
Views: 758

Re: ATC issue with tool_unclamp_timeout on a router

It sounds like the tool_unclamp_timer isn't resetting when the tool unclamps - it should- The tool_unclamp_timer should only be active while timing from the tool unclamp request to confirming the tool has unclamped. It doesn't need to be and shouldn't be active between putting the old tool away and ...
by centroidsupport
Thu Feb 17, 2022 9:04 am
Forum: Centroid Acorn CNC Controller
Topic: Missing Steps in circular interpolation
Replies: 31
Views: 5318

Re: Missing Steps in circular interpolation

What kind of drives and motors? Are they identical?
by centroidsupport
Thu Feb 17, 2022 7:38 am
Forum: Centroid Acorn CNC Controller
Topic: Unable to auto-detect Ether1616 <resolved>
Replies: 34
Views: 6364

Re: Unable to auto-detect Ether1616

Great news. FWIW I never meant to imply WIFI had anything to do with it. I was simply reporting how my machine was configured
by centroidsupport
Wed Feb 16, 2022 9:16 pm
Forum: Centroid Acorn CNC Controller
Topic: Unable to auto-detect Ether1616 <resolved>
Replies: 34
Views: 6364

Re: Unable to auto-detect Ether1616

I don't see the Acorn. Does the Acorn run correctly otherwise?

I don't see an earth ground connected to the Ether1616 though...

Ping 10.168.41.2?
by centroidsupport
Wed Feb 16, 2022 5:53 pm
Forum: Centroid Acorn CNC Controller
Topic: Unable to auto-detect Ether1616 <resolved>
Replies: 34
Views: 6364

Re: Unable to auto-detect Ether1616

Purely coincidently, I just happened to connect a ether1616 for the first time to my Acorn on my test bench this morning. My settings look identical, though I have IP6 enabled. It does show the DHCP setting enabled just as your screenshot does. The IP for Acorn is detected as 10.168.41.1. If I go in...
by centroidsupport
Wed Feb 16, 2022 4:01 pm
Forum: Centroid Acorn CNC Controller
Topic: Missing Steps in circular interpolation
Replies: 31
Views: 5318

Re: Missing Steps in circular interpolation

The first thing I notice is that you have the accel set to .5 and the paired axis set to 1. I suggest that you set them both to the same value and see if that helps. It looks like you are losing steps. What are you using to generate your g code? If you cut a simple circular pocket and/or circular fr...
by centroidsupport
Wed Feb 16, 2022 3:04 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Fuji inverter
Replies: 7
Views: 1593

Re: Fuji inverter

The specific model number of your Fuji Electric FRENIC-Ace would be helpful (apparently there are several variations). Even better would be a link to the manual for your inverter
by centroidsupport
Wed Feb 16, 2022 2:44 pm
Forum: Centroid Acorn CNC Controller
Topic: Missing Steps in circular interpolation
Replies: 31
Views: 5318

Re: Missing Steps in circular interpolation

Please post a current report
by centroidsupport
Tue Feb 15, 2022 5:52 pm
Forum: Centroid Acorn CNC Controller
Topic: Error 907 Z Axis Travel Exceeded After Homing
Replies: 5
Views: 1033

Re: Error 907 Z Axis Travel Exceeded After Homing

You have a Z+ axis travel limit set to +300mm and you're homing in the Z+ direction and 0 in the Z- travel. You'll never be able to move in the Z- direction after homing. You almost certainly wan to set the Z+ travel limit to 0 and the z- travel limit to -300