Centroid Community CNC Support Forum

Thank you Marc for your help. Very basic SSV functionality is here: ;SSV Uwe G10 P980 R1 turns SSV ON, G10 P980 R0 turns SSV OFF ;G10 P981 Rxxx time for SSV in ms ;G10 P982 Rxxx rpm change for SSV in +- revolution IF SpinStart_M && SV_MACHINE_PARAMETER_980 == 1 THEN SSV1_T = SV_MACHINE_PARAM...

Maybe I have basic SSV tomorrow, but I must solve a small problem with alternating timers...

Uwe

Of course its possible The question is whether you would like to make something like that? Because if you feel like doing something like that then it works and it will be finished this year I have something else for you......Have you changed the angle when cutting the G76 thread yet? Do that and ch...

I am using fusion360 also with an modified PP

https://centroidcncforum.com/viewtopic.php?f=66&t=7936

You can use most milling toolpaths, since Y axis is interpolated with the C axis.

Uwe

Try to change PA_00 - PA_02 to reduce vibration.

Uwe

Sure it is possible:



But not with G112, you have to use CAM or for such simple shapes a spreadsheet.

Uwe

Do you have a manual from the servo driver?

Uwe

I think it is possible to build a SSV function in the PLC...

Uwe

Without the g-code file it is difficult to help you...

Uwe

I do not think it is a software problem since my lathe is turning without visible steps.

I would try to use sharp inserts and play with U W in G70.

Uwe