To display encoder position on the DRO set Parameter 423 according to the manual.
Uwe
Search found 2143 matches
- Mon May 27, 2024 1:27 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Machine parameter for Linear encoder input
- Replies: 11
- Views: 527
- Mon May 27, 2024 8:46 am
- Forum: Centroid Acorn CNC Controller
- Topic: AcornSix - Zri Homing with linear scales
- Replies: 26
- Views: 1729
Re: AcornSix - Zri Homing with linear scales
On some reading heads signal strength can be tuned with a poti.
Uwe
Uwe
- Sun May 26, 2024 1:34 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Rigid Tapping Question
- Replies: 39
- Views: 447
Re: Rigid Tapping Question
P04-14 and -15 both are set in ms.
Uwe
Uwe
- Sun May 26, 2024 4:56 am
- Forum: Centroid Acorn CNC Controller
- Topic: Spindle issue after using a gcode program
- Replies: 8
- Views: 96
Re: Spindle issue after using a gcode program
You can set VFD Enable and connect nothing to test if m3 is working after this.
Uwe
Uwe
- Sun May 26, 2024 4:38 am
- Forum: Centroid Acorn CNC Controller
- Topic: Spindle issue after using a gcode program
- Replies: 8
- Views: 96
Re: Spindle issue after using a gcode program
In the PLC SpindleEnableOut_M is required to activate M3, maybe with no VFD Enable, after M5 it will not be set again.
Uwe
Uwe
- Sun May 26, 2024 3:20 am
- Forum: Centroid Acorn CNC Controller
- Topic: Rigid Tapping Question
- Replies: 39
- Views: 447
- Sun May 26, 2024 3:06 am
- Forum: Centroid Acorn CNC Controller
- Topic: Spindle issue after using a gcode program
- Replies: 8
- Views: 96
Re: Spindle issue after using a gcode program
How do you make sure that the VFD is enabled, if not sending an enable signal?
Uwe
Uwe
- Sun May 26, 2024 3:01 am
- Forum: Centroid Acorn CNC Controller
- Topic: Rigid Tapping Question
- Replies: 39
- Views: 447
Re: Rigid Tapping Question
The video I showed you is with forming.
Forming will not work in all materials, must be with >15% elongation at break.
Predrilling needs to be bigger than for thread cutting, follow manufactures recommendations.
Uwe
Forming will not work in all materials, must be with >15% elongation at break.
Predrilling needs to be bigger than for thread cutting, follow manufactures recommendations.
Uwe
- Sun May 26, 2024 2:35 am
- Forum: Centroid Acorn CNC Controller
- Topic: Rigid Tapping Question
- Replies: 39
- Views: 447
Re: Rigid Tapping Question
My settings with Servo set to 0.2 s acceleration.
Try 0.5s Spindle Accel/Decel Time first in the Wizard
You can do some air tapping to watch if it seems to work.
Uwe
Try 0.5s Spindle Accel/Decel Time first in the Wizard
You can do some air tapping to watch if it seems to work.
Uwe
- Sun May 26, 2024 2:29 am
- Forum: Centroid Acorn CNC Controller
- Topic: Spindle issue after using a gcode program
- Replies: 8
- Views: 96
Re: Spindle issue after using a gcode program
You have no Output VFD Enable
Uwe
Uwe