ProbeApp will work with 5.10
Uwe
Search found 2165 matches
- Thu May 30, 2024 12:51 pm
- Forum: Centroid Acorn CNC Controller
- Topic: ProbeApp V3: The Ultimate Probe Software for CNC12
- Replies: 74
- Views: 124595
- Thu May 30, 2024 12:42 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Finally did a fresh install and WPMG still not being recognized by windows
- Replies: 19
- Views: 299
Re: Finally did a fresh install and WPMG still not being recognized by windows
copy the cncm folder on a thumb drive and back after recovery.
Uwe
Uwe
- Thu May 30, 2024 12:12 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Finally did a fresh install and WPMG still not being recognized by windows
- Replies: 19
- Views: 299
Re: Finally did a fresh install and WPMG still not being recognized by windows
You can also try to use a recovery point from a time the WMPG was working...
Uwe
Uwe
- Thu May 30, 2024 12:05 pm
- Forum: Centroid Acorn CNC Controller
- Topic: AcornSix - Zri Homing with linear scales
- Replies: 31
- Views: 1959
Re: AcornSix - Zri Homing with linear scales
On my drivers Z+- from OZ+- are recognized from acorn 6 Encoder inputs and no problem to trigger a 5V SSR from OCZ / GND.
Uwe
- Thu May 30, 2024 11:56 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Feature Request - SSV
- Replies: 32
- Views: 2517
Re: Feature Request - SSV
Good news
Uwe
Uwe
- Thu May 30, 2024 11:38 am
- Forum: Centroid Acorn CNC Controller
- Topic: New Build, PM2700 lathe with Acorn, Videos and Photos <upgraded to AC servos>
- Replies: 96
- Views: 95651
Re: New Build, PM2700 lathe with Acorn, Videos and Photos <upgraded to AC servos>
3.6 kw sounds ok.
Output C Axis enable can switch the servo driver from speed to position mode. How this is done is in the servo driver manual.
Uwe
Output C Axis enable can switch the servo driver from speed to position mode. How this is done is in the servo driver manual.
Uwe
- Thu May 30, 2024 7:45 am
- Forum: Centroid Acorn CNC Controller
- Topic: AcornSix - Zri Homing with linear scales
- Replies: 31
- Views: 1959
Re: AcornSix - Zri Homing with linear scales
I am using them for spindle and axis drive.
Uwe
Uwe
- Wed May 29, 2024 7:26 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Centroid Mill Turn PP for fusion 360 (WIP)
- Replies: 17
- Views: 15022
Re: Centroid Mill Turn PP for fusion 360 (WIP)
I have default abo for fusion, simulation is no problem, but the part will not turn, the tool does change its position around the part.
Uwe
Uwe
- Wed May 29, 2024 7:20 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Centroid Acorn / Fusion360 Post Processor M05
- Replies: 2
- Views: 60
Re: Centroid Acorn / Fusion360 Post Processor M05
fusion is posting M30 at the end, you can use this to stop the spindle faster, otherwise M3 is only reset when the g code ends and the spindle will coast down.
Uwe
Uwe
- Wed May 29, 2024 2:05 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Rigid Tapping Not Working - Summary <resolved, works great with photos> >
- Replies: 20
- Views: 324
Re: Rigid Tapping Not Working - Summary
What we did was upgrade to 5.10 and using rigid tapping parameters I know that will work with a fast servo spindle drive....
Cool thing update done from Germany on a CNC in Arizona
IMHO Centroids rigid tapping is better or as good as most other industrial CNCs....
Uwe
Cool thing update done from Germany on a CNC in Arizona
IMHO Centroids rigid tapping is better or as good as most other industrial CNCs....
Uwe