Centroid Community CNC Support Forum

When starting with DIY CNC 4 years ago I also had a look at Masso but it was out after a few minutes.
Not enough functions and not very open to customize it, no conversational g code generation for easy parts.

The easy update function and additional APP for a smartphone is nothing if the CNC cannot ...

You can find the serial number if you power up the board in the CNC12 screen, or in a report generated.

If you purchase a license you have to send a report anyway

Go step by step from the installation manual and it is easy to setup your CNC..

I prefer one input for each axis for a HomeLimit ...

Wiring:

https://www.centroidcnc.com/dealersuppo ... 262.r1.pdf

Yes there must be +24V on 24 IN, otherwise the inputs will not work.

Uwe

IMHO for the original function you have to use the original encoder from baruffaldi.

It is one with 4bit Gray Code, parity and strobe signals, so it will use 6 inputs on the Acorn board.

Acorn can read the current tool position with the Gray code.

Uwe

"AirBlowNozzle" output is in 5.40

Uwe

Probably. I would opt for one from a manufacturer who can spell, and who can draw a legible porting diagram; but then I am just an elitist snob about such things.
https://www.automationdirect.com/adc/shopping/catalog/valves/directional_control_solenoid_valves/solenoid_valves/avs-5222-24d


Since ...

In this time I have tested several updates for beta testing on two full customized machines with Acorn6....

I cannot read what your problem really is here?

I just use NP++ to compare the VCP skin and PLC after an update to redo any custom editing if it is needed.

Uwe

Just a sample with a 12mm Endmill and no compensation.

Done in a minute, I love Intercon

Hope this helps to make it fit to your part

Uwe

alright, i guess ive lost you guys. last thing, the voltage going to the vfd dips during operations. at a seemingly random interval. When i measure the voltage at the acorn board the voltage smooths out. any ideas?

videos in the drive folder



For the voltage fluctuation, I'd take a look at ...

Green is not tripped and red is tripped.

Make sure with ALT+I the Probe Tripped Input is changing if the probe is red (tripped)

Uwe