I have default abo for fusion, simulation is no problem, but the part will not turn, the tool does change its position around the part.
Uwe
Search found 2158 matches
- Wed May 29, 2024 7:26 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Centroid Mill Turn PP for fusion 360 (WIP)
- Replies: 17
- Views: 14986
- Wed May 29, 2024 7:20 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Centroid Acorn / Fusion360 Post Processor M05
- Replies: 2
- Views: 26
Re: Centroid Acorn / Fusion360 Post Processor M05
fusion is posting M30 at the end, you can use this to stop the spindle faster, otherwise M3 is only reset when the g code ends and the spindle will coast down.
Uwe
Uwe
- Wed May 29, 2024 2:05 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Rigid Tapping Not Working - Summary
- Replies: 20
- Views: 143
Re: Rigid Tapping Not Working - Summary
What we did was upgrade to 5.10 and using rigid tapping parameters I know that will work with a fast servo spindle drive....
Cool thing update done from Germany on a CNC in Arizona
IMHO Centroids rigid tapping is better or as good as most other industrial CNCs....
Uwe
Cool thing update done from Germany on a CNC in Arizona
IMHO Centroids rigid tapping is better or as good as most other industrial CNCs....
Uwe
- Wed May 29, 2024 6:43 am
- Forum: Centroid Acorn CNC Controller
- Topic: several issues with Intercon
- Replies: 4
- Views: 43
Re: several issues with Intercon
Just a side note, in both sreenshots, you have loaded T0600, this is Tool #6 with no active offset, T0606 would be Tool #6 with Offset #6
Uwe
Uwe
- Wed May 29, 2024 5:34 am
- Forum: Centroid Acorn CNC Controller
- Topic: several issues with Intercon
- Replies: 4
- Views: 43
Re: several issues with Intercon
One Shots are doing its thing from the current position, that is why I have made a VCP button "Change Tool and rapid to X"
https://centroidcncforum.com/viewtopic. ... ton#p69844
Uwe
https://centroidcncforum.com/viewtopic. ... ton#p69844
Uwe
- Wed May 29, 2024 12:06 am
- Forum: Centroid Acorn CNC Controller
- Topic: Rigid Tapping Not Working - Summary
- Replies: 20
- Views: 143
Re: Rigid Tapping Not Working - Summary
They should work.
Uwe
Uwe
- Tue May 28, 2024 7:57 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Rigid Tapping Not Working - Summary
- Replies: 20
- Views: 143
Re: Rigid Tapping Not Working - Summary
I am running out of ideas....
Next thing I would do is update to 5.10.
Uwe
Next thing I would do is update to 5.10.
Uwe
- Tue May 28, 2024 3:24 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Rigid Tapping Not Working - Summary
- Replies: 20
- Views: 143
Re: Rigid Tapping Not Working - Summary
I am tapping this size with 1500 rpm with good quality taps...
Uwe
Uwe
- Tue May 28, 2024 2:17 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Rigid Tapping Not Working - Summary
- Replies: 20
- Views: 143
Re: Rigid Tapping Not Working - Summary
P68 ist the speed at the end of the tapping cycle, so you must start at a higher rpm....
Uwe
Uwe
- Tue May 28, 2024 1:41 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Rigid Tapping Not Working - Summary
- Replies: 20
- Views: 143
Re: Rigid Tapping Not Working - Summary
Why is P68 = 689 and not default 640 ? Your G-code is S 689 like P68.... 11.3.55 Parameter 68 – Minimum Rigid Tapping Spindle Speed (Rigid Tapping Parameter) This parameter holds the value that the spindle slows down to from the programmed spindle speed towards the end of the tapping cycle. The lowe...