Yep wired wrong.
Output that did not work was wired to ground. Scope showed good signals on other outputs. ???
Can't wait to see how it works.
The machine seems to like it.
Thanks
Rex
Search found 4 matches
- Tue Sep 21, 2021 2:30 am
- Forum: Centroid Acorn CNC Controller
- Topic: encoder
- Replies: 7
- Views: 1557
- Mon Sep 20, 2021 7:57 pm
- Forum: Centroid Acorn CNC Controller
- Topic: encoder
- Replies: 7
- Views: 1557
Re: encoder
The wiring is not wrong. The battery is connected to pin 2 and 0v and common and pin 9 and vcc and +. Pin 1 is nc. The screw is even loose. pinout is: 1 || shield 2 || 6 3 || 7 4 || 8 5 || 9 connector end As pictured on the setup the encoder functions correct. It only fails when connected to the Aco...
- Mon Sep 20, 2021 4:20 pm
- Forum: Centroid Acorn CNC Controller
- Topic: encoder
- Replies: 7
- Views: 1557
Re: encoder
This gets difficult for me. Tested with scope when powered by a battery. All outputs work. Checked with scope when connected to machine. Acorn channel b and -b was flatlined. Channel a and -a worked. Swapped channel a and b. Checked with scope and Acorn b and -b flatlined. When I had the encoder tha...
- Mon Sep 20, 2021 1:14 pm
- Forum: Centroid Acorn CNC Controller
- Topic: encoder
- Replies: 7
- Views: 1557
encoder
Lathe : Techno-Isel
encoder: omron e6b2-cwz1x
Controller: Acorn
Chanel b flatlines when connected to Acorn.
Encoder works when not connected to machine.
What is the next step to resolve this problem?
encoder: omron e6b2-cwz1x
Controller: Acorn
Chanel b flatlines when connected to Acorn.
Encoder works when not connected to machine.
What is the next step to resolve this problem?