Search found 19 matches
- Thu Jan 19, 2023 2:15 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Struggling JMC servo alarm wiring
- Replies: 9
- Views: 658
Re: Struggling JMC servo alarm wiring
No I`am not. i got the motors running via the normal connectors. thats not the problem. the question is at the alarm ports
- Thu Jan 19, 2023 1:51 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Struggling JMC servo alarm wiring
- Replies: 9
- Views: 658
Re: Struggling JMC servo alarm wiring
i did if you see the thread was originally from me. but it didn`t worked
- Thu Jan 19, 2023 1:07 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Struggling JMC servo alarm wiring
- Replies: 9
- Views: 658
Re: Struggling JMC servo alarm wiring
the drawing is not tested....
- Thu Jan 19, 2023 7:48 am
- Forum: Centroid Acorn CNC Controller
- Topic: Struggling JMC servo alarm wiring
- Replies: 9
- Views: 658
Re: Struggling JMC servo alarm wiring
Hi,
no i didn`t see this before. Do you know who drawing it? the wiring in this shematic doesn`t allow an clearing/Reset of the alarm. And the max input current of the ALM ports are 8mA...that means that a Resistor of 3kOhm is needed.
no i didn`t see this before. Do you know who drawing it? the wiring in this shematic doesn`t allow an clearing/Reset of the alarm. And the max input current of the ALM ports are 8mA...that means that a Resistor of 3kOhm is needed.
- Wed Jan 18, 2023 1:19 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Struggling JMC servo alarm wiring
- Replies: 9
- Views: 658
Struggling JMC servo alarm wiring
Hello,
i`am confused how to wire the alarm port (ALM-,ALM+) on my JMC (iHSV57) servos with the acorn controller. A friend made a shematic but i don`t know if this work or could damage my board.What do you think? greetz,
Andy
i`am confused how to wire the alarm port (ALM-,ALM+) on my JMC (iHSV57) servos with the acorn controller. A friend made a shematic but i don`t know if this work or could damage my board.What do you think? greetz,
Andy
- Wed Jun 22, 2022 5:00 pm
- Forum: Centroid Acorn CNC Controller
- Topic: VFD Frequency for Emco PCTurn 55
- Replies: 2
- Views: 517
VFD Frequency for Emco PCTurn 55
Hello togehter, i`am on the finish Line to Retrofit my Emco PC Turn 55 to Acorn and i have 2 questions. 1. Can anyone tell me, which Frequency on the VFD are set for the max. spindle speed with the original spindle motor? 2. The machine has 3 ranges for the spindle speeds (high, mid, low). It can be...
- Wed Feb 16, 2022 2:51 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Emco PC Turn 50 ATC issue
- Replies: 48
- Views: 12686
Re: Emco PC Turn 50 ATC issue
:cry: i just give the board a friend who want try to fix it and spend already some cash for the new seedboard and activation :cry: i just dont want to spend another 199$ plus tax and shipping to germany. it was a stuppif mistake... i connected one GND wire to the turret control board.. but not an DC...
- Wed Feb 16, 2022 2:39 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Emco PC Turn 50 ATC issue
- Replies: 48
- Views: 12686
Re: Emco PC Turn 50 ATC issue
hi Marty, yes correct i have two turret sensors i ask because i accidentally wired my acorn wrong at the beginning and blow it up :oops: :cry: :oops: a friend could fix it really good include a new seedboard because the old one seems to be dead...but i have sadly a problem with the DB25 connection.....
- Wed Feb 16, 2022 1:40 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Emco PC Turn 50 ATC issue
- Replies: 48
- Views: 12686
Re: Emco PC Turn 50 ATC issue
You are using the DB25 to connect the sensors correct? DB 25 inputs are 5V logic, Acorn input headers stand at +24VDC DO NOT CONNECT your turret sensors to the Acorn header. Assuming you are using Schematic S14986 for the PC55? Hi Marty, is there any way to connect the turret sensors to the acorn h...
- Tue Feb 01, 2022 5:40 pm
- Forum: Centroid Acorn CNC Controller
- Topic: EMCO turn 55 ATC Problem
- Replies: 1
- Views: 528
EMCO turn 55 ATC Problem
Hello, i have a problem setting up my ATC from my Emco PCTurn 55. The tool changer has 2 sensors. 1 for tool counting and 1 for homing. I set the homing signal on input 3 and the tool count signal on input 4. Both connected via DB25 connector. Problem -> If i press "Index turret", the ATC ...