OK, understood. I'll contact you off line directly.
Thanks
Julian
Search found 28 matches
- Wed Nov 15, 2023 4:37 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Door Interlock
- Replies: 4
- Views: 1154
- Tue Nov 14, 2023 3:41 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Door Interlock
- Replies: 4
- Views: 1154
Re: Door Interlock
Hi Mark, Thanks for the info. Firstly you are correct in that if I start the spindle manually then I can open the door and it still runs. Also the program will start with the door open and the axis move but it will stop when a spindle is commanded, I’d rather the axis did not move, while in auto, at...
- Sun Nov 12, 2023 9:06 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Door Interlock
- Replies: 4
- Views: 1154
Door Interlock
Hi,
When I press feed hold and open the door the program aborts. I’d like to be able to close the door and continue. I can’t see any parameters related to this on the Oak. I can see Acorn has 985 that looks related, but that does not appear on the OAK
Any ideas?
Thanks
Julian
When I press feed hold and open the door the program aborts. I’d like to be able to close the door and continue. I can’t see any parameters related to this on the Oak. I can see Acorn has 985 that looks related, but that does not appear on the OAK
Any ideas?
Thanks
Julian
- Fri Feb 03, 2023 10:02 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Wired MPG
- Replies: 3
- Views: 730
Re: Wired MPG
Thanks, it's working now. I was putting +5v to the inputs!
- Fri Feb 03, 2023 7:23 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Wired MPG
- Replies: 3
- Views: 730
Wired MPG
Hi, I’m wiring up my own MPG, axis and multiplier selector on an Oak. I’ve followed the wiring diagram for H19, but I can’t get anything out of it. What’s odd is that I can’t get any of the inputs, so INP773 through INP783 to signal on the PLC diagnostics. I can’t even invert/force them with ctrl + ...
- Tue Jan 10, 2023 7:15 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Yaskawa Sigma 5 Setup on Oak
- Replies: 2
- Views: 556
Re: Yaskawa Sigma 5 Setup on Oak
Success!!
That did the trick, thank you so much. For reference TB267 says: "308-310 should be set to 7, 8, and 9". May be worth adding that Oak requires 1, 2 and 3
Best regards
Julian
That did the trick, thank you so much. For reference TB267 says: "308-310 should be set to 7, 8, and 9". May be worth adding that Oak requires 1, 2 and 3
Best regards
Julian
- Mon Jan 09, 2023 5:39 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Yaskawa Sigma 5 Setup on Oak
- Replies: 2
- Views: 556
Yaskawa Sigma 5 Setup on Oak
My post seems to have gone from last week. Not sure why, so I’m starting another. I was chatting to @cncsnw who was very kindly helping me out. I have recreated the thread as best possible Original message @Talyond wrote: I’m setting up as per technical bulletin 267, but I have a CNC12. All cables w...
- Mon Dec 19, 2022 6:25 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Quadrature Error
- Replies: 11
- Views: 2101
Re: Quadrature Error
@ashesman. I've purchased a single Yaskawa drive and motor. Just sorting cables out, if they work I'm moving on. Keep you posted.
Thank!
Thank!
- Mon Dec 19, 2022 6:20 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CONFIRM ENCODER COMMUNICATION
- Replies: 17
- Views: 3102
Re: CONFIRM ENCODER COMMUNICATION
@cncsnw. Not tried that 120v, but like you say that's hard to come by. I've purchased a single Yaskawa drive and motor. Just sorting cables out, if they work I'm moving on. Keep you posted.
Thank!
Julian
Thank!
Julian
- Thu Sep 22, 2022 9:09 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CONFIRM ENCODER COMMUNICATION
- Replies: 17
- Views: 3102
Re: CONFIRM ENCODER COMMUNICATION
Thanks @ruirosa unfortunately I had the new drawing so was already wired that way:(
Julian
Julian