Centroid Community CNC Support Forum

Hello All. Thought I'd make a Topic On setup and use of a Tangential Knife with CNC12 Setting an axis for Tangential Knife is Available on all Centroid controls on Software version 5.08 and newer. The CNC12 Tangential Knife Axis Setup TB can be found here: https://www.centroidcnc.com/dealersupport/t...

Hello Dov Its recommended to have Individual D or C curve Circuit Breakers for The Different Power Supplies in the Cabinet. Individual Circuit Breakers enables better Protection of the Individual Cabinet components Also Separate Breakers can be a big help when trying to Diagnose anything in the Cabi...

Hello All. Thought I'd make a Topic On setup and use of a Tangential Knife with CNC12 Setting an axis for Tangential Knife is Available on all Centroid controls on Software version 5.08 and newer. The CNC12 Tangential Knife Axis Setup TB can be found here: https://www.centroidcnc.com/dealersupport/t...

Mike. CNC12 Plasma can build up Plots in the Cncm folder.

To decrease the Size of the report you can move or delete the Plots out of the Cncm folder.

Once the plots have been moved out, create a fresh report.zip and try again.

Here's another thread on the Subject. Looks to be a different design than your link.
https://centroidcncforum.com/viewtopic. ... ail#p62210

The Path to Launch the Wizard from the Home Screen of CNC12 is

F7 Utility - F10 Acorn Wizard

I've Whipped up a short video of launching the Wizard and assigning Torch_on

I also mention the PLC diagnostics Menu functionality.

I am building my new plasma table and just received my acorn CNC controller with acorn THC. I have a 2 year old Primeweld cut 60 that I have used on my previous table. I just bought the UPM machine torch that uses hypertherm consumables. My questions: 1. Is there anything I need to do on my cutter ...

Ah yes! That's it.

Glad you figure it out

Hello Mike

Looks like the report and photo album link works.

Have you tried a battery?

Is the THC set to Installed in the profile manager?

Reason for THC not enabling in the Y axis direction was the overall turns ratio difference between X and Y. Changing the Velocity anti dive to 75% let the Y axis Moves enable THC. X and Y with equal or close to equal overall turns ratio would would have an equal Velocity anti dive setting. Will have...