Search found 500 matches
- Wed Apr 17, 2024 2:27 pm
- Forum: Acorn CNC Plasma
- Topic: Torchmate accumove 2 conversion
- Replies: 45
- Views: 1451
Re: Torchmate accumove 2 conversion
The Overall turns ratio is an absolute. There is only one Overall turns ratio number. As you found your Overall turns ratio is 1 or really close to it. With the Overall Turns ratio set correctly. Any number of Steps per Rev settings can be used. As long as the drive and wizard steps per rev are matc...
- Wed Apr 17, 2024 12:53 pm
- Forum: Acorn CNC Plasma
- Topic: Torchmate accumove 2 conversion
- Replies: 45
- Views: 1451
Re: Torchmate accumove 2 conversion
Thats what I'm thinking.
Can you get a better picture of the Dip switches. Up close and focused.
There is a symbol on the switches that says ON with an arrow. I can barely make it out.
Can you get a better picture of the Dip switches. Up close and focused.
There is a symbol on the switches that says ON with an arrow. I can barely make it out.
- Wed Apr 17, 2024 12:26 pm
- Forum: Acorn CNC Plasma
- Topic: Torchmate accumove 2 conversion
- Replies: 45
- Views: 1451
Re: Torchmate accumove 2 conversion
Alright so it looks like 5=OFF 6=ON 7=OFF 8=ON
So that is 12800 steps per rev right?
So that is 12800 steps per rev right?
- Wed Apr 17, 2024 11:51 am
- Forum: Acorn CNC Plasma
- Topic: Torchmate accumove 2 conversion
- Replies: 45
- Views: 1451
Re: Torchmate accumove 2 conversion
Hard to tell from the picture but I had the dip switches confused. I was looking at 7-10 in that last picture. After closer inspection 5-8 look to be 5=ON 6=OFF 7=ON 8=ON This would mean the drives are set to 1600 steps. Digger drives closer look.png This makes more sense the 1600 steps is closer to...
- Wed Apr 17, 2024 11:37 am
- Forum: Acorn CNC Plasma
- Topic: Torchmate accumove 2 conversion
- Replies: 45
- Views: 1451
Re: Torchmate accumove 2 conversion
Digger.
Looking at the Photo album.
I see the Drives do not have a 4000 step setting.
It Appears they are set as OFF OFF ON ON which is 3200 Steps.
These are your current drives in the Pictures correct?
Looking at the Photo album.
I see the Drives do not have a 4000 step setting.
It Appears they are set as OFF OFF ON ON which is 3200 Steps.
These are your current drives in the Pictures correct?
- Thu Apr 11, 2024 12:19 pm
- Forum: Acorn CNC Plasma
- Topic: Can Lose power in one half of whole system.?
- Replies: 3
- Views: 103
Re: Can Lose power in one half of whole system.?
Best bet is to Contact Hypertherm.
I think I remember someone on YouTube rigging up a hand torch. I think it was Clough49. It was a 45xp but the larger Power max hand torches should be the same.
I think I remember someone on YouTube rigging up a hand torch. I think it was Clough49. It was a 45xp but the larger Power max hand torches should be the same.
- Wed Apr 10, 2024 9:37 am
- Forum: Acorn CNC Plasma
- Topic: Centroid v 4, extends and hits the material.
- Replies: 4
- Views: 169
Re: Centroid v 4, extends and hits the material.
Any Luck Zagga?
Do you have Internet on the machine PC?
I can help switch you to the plasma software through team viewer.
Do you have Internet on the machine PC?
I can help switch you to the plasma software through team viewer.
- Wed Apr 10, 2024 9:32 am
- Forum: Acorn CNC Plasma
- Topic: Can Lose power in one half of whole system.?
- Replies: 3
- Views: 103
Re: Can Lose power in one half of whole system.?
The Acorn and CNC12 software will be non the wiser if the Plasma unit is powered on or OFF. Power cycling the Hypertherm won't affect anything Bak who is on the Forum here recently hooked up his hand torch and made the changes necessary inside the hand torch. Bak called Hypertherm and they Instructe...
- Tue Apr 09, 2024 5:49 pm
- Forum: Acorn CNC Plasma
- Topic: Centroid v 4, extends and hits the material.
- Replies: 4
- Views: 169
Re: Centroid v 4, extends and hits the material.
Download and install the latest acorn plasma software V5.08 at the link I provided in my last post
Don't worry about the license for now
Don't worry about the license for now
- Tue Apr 09, 2024 2:24 pm
- Forum: Acorn CNC Plasma
- Topic: Centroid v 4, extends and hits the material.
- Replies: 4
- Views: 169
Re: Centroid v 4, extends and hits the material.
Welcome to the forum. Thank you for the Report. Can you please attach the Gcode jobs you are running when the Z locks up. I want to see the Gcode job you a using. You best chance at having a working Plasma table with the Acorn is to Download and install Acorn Plasma software. Your current software i...