Did you try the different duplex settings? I've seen some PC's that needed the Duplex setting changed or manually set.
100mps or 100 Half duplex or 100 full duplex.
Search found 516 matches
- Fri Apr 26, 2024 12:39 pm
- Forum: Acorn CNC Plasma
- Topic: Torchmate accumove 2 conversion
- Replies: 52
- Views: 3770
- Thu Apr 25, 2024 8:43 pm
- Forum: Acorn CNC Plasma
- Topic: Speed around corners
- Replies: 4
- Views: 103
Re: Speed around corners
Those are some nice cuts. Clean and smooth. Is the Wizard set to 3200 steps/rev for X and Y? I think the last report I saw something like 6400 Can you post a fresh report with the latest settings. Can I see the dip switch settings on the drives? Did setting Parameter 223 to the 100-300 range help?
- Thu Apr 25, 2024 6:47 pm
- Forum: Acorn CNC Plasma
- Topic: Torchmate accumove 2 conversion
- Replies: 52
- Views: 3770
Re: Torchmate accumove 2 conversion
Seeing a lot of com errors in the msg log.
Have you tried disabling the windows firewall completely?
Have you tried disabling the windows firewall completely?
- Thu Apr 25, 2024 11:29 am
- Forum: Acorn CNC Plasma
- Topic: Torch stops and Rises up
- Replies: 1
- Views: 41
Re: Torch stops and Rises up
I run a CnC plasma but instade of firing the torch stops and Rises up. Could this be something that would be solved within the software.. Your Machine with Acorn Mill is Controlled by the Gcode completely. If the Job stops without an error in the message LOG. it was most Likely something in the Gco...
- Wed Apr 24, 2024 1:13 pm
- Forum: Acorn CNC Plasma
- Topic: Centroid v 4, extends and hits the material.
- Replies: 6
- Views: 236
Re: Centroid v 4, extends and hits the material.
Download TeamViewer
https://www.teamviewer.com
https://www.teamviewer.com
- Wed Apr 24, 2024 11:49 am
- Forum: Acorn CNC Plasma
- Topic: Speed around corners
- Replies: 4
- Views: 103
Re: Speed around corners
What Kind of Drives are on X,Y and Z? Is this a direct rack and pinion table?
Pictures of each axis and the drives would help
Pictures of each axis and the drives would help
- Tue Apr 23, 2024 9:35 pm
- Forum: Acorn CNC Plasma
- Topic: Speed around corners
- Replies: 4
- Views: 103
Re: Speed around corners
Can you post some of the G-code jobs from the example Pictures. Does the same thing happen without smoothing? Try setting parameter 223 to 300 Path to the Parameters list from the home screen is F1 Setup>F3 Config>F3 Parameters This will Lower the Vector rate with smoothing and should help for smoot...
- Mon Apr 22, 2024 6:10 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: V5.1 Lathe distance to go isn't working
- Replies: 3
- Views: 153
Re: V5.1 Lathe distance to go isn't working
I was not able to replicate the issue with your report.
Usually, the X moves in the G-code I tested with was very short and the distance to go was shown briefly since the X move was very short and quickly executed.
Usually, the X moves in the G-code I tested with was very short and the distance to go was shown briefly since the X move was very short and quickly executed.
- Mon Apr 22, 2024 6:04 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: Centroid V5.10 tool number
- Replies: 4
- Views: 178
Re: Centroid V5.10 tool number
This is a result of pressing write setting with the Custom ATC macro set to yes. Doing this is making an assumption that the user will set these parameters manually. What most people do is have the slider set to no press write setting to cnc control at least once which sets all ATC parameters proper...
- Mon Apr 22, 2024 12:54 pm
- Forum: Acorn CNC Plasma
- Topic: centroid with sheetcam.
- Replies: 2
- Views: 94
Re: centroid with sheetcam.
The M61 Macro can be Customized to Operate differently. Can you Post some example Gcode of a Wiggle Peirce? I'm assuming you would be looking for something like. M61 is called Touch off cycle and the Z retracts to the Pierce Height. The torch is fired and X Y motion starts for the Wiggle pierce. Aft...