Centroid Community CNC Support Forum

cnckeith wrote: ↑Tue May 14, 2024 7:48 pm i edited your dxf and changed three of the poly arcs with real arcs

dxf tele.png

merci beaucoup comment ont fait un vrai arc avec qcad

Why do you want to import dxf if you have the model in fusion? Postprocessor for Centroid in fusion is very good. Uwe Mon but est d'utiliser un maximum intercom C'est tellement simple d'utilisation Imaginons que ma poche est trop petite En deux temps trois mouvements j'ai modifié mes cotations Et s...

suntravel wrote: ↑Mon May 13, 2024 1:03 pm I have no problems with dxf import, but this one is also not a closed contour.

To mill pockets, dxf must be closed around the pocket.

I use AutoCAD LT or Inkscape with no problems.

Uwe

this is what I want to create with the dxf

voila ce que je veut créer avec le dxf

I have no problems with dxf import, but this one is also not a closed contour. To mill pockets, dxf must be closed around the pocket. I use AutoCAD LT or Inkscape with no problems. Uwe I redid my dxf the outline it selects in one go without problem but it does not want to be interior I just want to...

normally a dxf option is made to save time I use it every day when I work on itnc 530 never have so many problems

I succeeded with the cnc12 v5.1 Offline Mill and mill Intercon except that my parameters were in inches once I changed to millimeters it no longer works j'ai réussi avec le cnc12 v5.1 Offline Mill and mill Intercon sauf que mes paramètres était en pouce une fois passer en millimètre ca ne fonctionne...

suntravel wrote: ↑Fri May 10, 2024 9:35 am That is because the conture is not closed, not all points are connected.

Uwe

can you try with these new elements?

suntravel wrote: ↑Fri May 10, 2024 9:35 am That is because the conture is not closed, not all points are connected.

Uwe

however if I look with Qcad no problem and when I select the contour on intercom too

hello I can't create a pocket with the dxf
Here are attached the files I tried

The manuals that Centroid put together are amazing! "15.3.93 Parameter 146 — Feed Hold Threshold for Feed Rate Override This parameter sets the lowest value permitted as the feed rate override percentage before feed hold is engaged. Feed hold will be released when the override percentage is gr...