Centroid Community CNC Support Forum

That Z limit error is new. It all started with 325 limit error which does not specify errror type.

The Z and all the axis have a NPN photo electric sensor in the middle of the axis. Mechanical limit flags are on the ends of each axis to trigger the sensor.
I can physically use a new limit sensor ...

we did press F8 before running the job, and there was no error. Yes, soft limits are correct.

I just ran a slightly modified version of 1003 (decreased feedrate) and errored out. Here's the fresh report and new NC code.

Hi Keith,

Here's the 3 NC code mentioned in the original post. 1002 finished on the first try. 1001 and 1003 experienced the random 325 errors but eventually finished cutting, after restarting the program several times. All three programs successfully air cut on the first try, 1 inch above the part ...

Does anyone have an idea what this 325 limit error can be?
Thanks in advance.

Chuck,

I noticed you are in Northern Calif. and you are a CNCer. Curious to know how your project is coming along or if you ever did pull the trigger.
I am in San Carlos and am new to the Centroid forum. I have been working on a few CNC projects and just want to connect with others that are cnc ...

Hello,

I am trying to see if anyone else has run into the 325 Limit Error. I searched the forum but couldn't find anything specific to my issue.

I have a DIY router I built. It is a gantry style with the y table moving below and the x moving across the gantry and z moving up and down on the x ...

Thanks for all the replies. Sorry newbie poster. Per Marty's insight I will upload my controller, pics of my machine etc this weekend.

Arin

Hello,

I was trying to see if anyone else has tried to configure the z axis in the follow manner on the Forum but did not find anything.

I have a DIY router I built. IT is a ganry style with the y table moving below and the x moving across the gantry and z moving up and down on the x carriage. I ...