Centroid Community CNC Support Forum

That’s what I thought. Thanks that cleared up my question. When I do the upgrade I’ll post a success story.

VFD I hate auto correct. One more question on the generic VFD wiring is the VFD common neg or positive. Common is usually neg. but on the wiring for the commander sk it appears power is taken from b2 and routed to b4 to b6 to enable those functions. Ground side switching. If this is the case I think...

Currently larken uses 4 wires the have connections to t1 block wire (10v-)t2 red wire (10v+) both inputs. They wired an output from B2 (24v+) white wire to the controller. B3 digital output (0-24v+) is jumpered to B4 digital input enable or reset. B3 has a Brown wire connecting it to the Larken cont...

Hi I am a new member. I have a Larkin 5050R CNC router Uses the Star CNC Controller. I am currently Considering upgrading top the Acorn controller. I am confident I can hookup the drives to the Acorn but am a little concerned about the hook up of the VFD. I have a Commander SK VFD. I know how it is ...