Centroid Community CNC Support Forum

Unfortunately I get the error message: 531 M22x missing initial quote This happens if I use the same command that is in the manual: M224 /0 #300 “Please enter the direction that you wish to probe in the %c axis: (+ or -)” #100 Or if I enter the command as I edited it: N0150 M224 /0 #100 “ENTER BASE ...

We cut parts that are the same but different lengths. On our shopbot it is possible to put an input command in the code and ask the operator what the length is. We then do a bit of math and cut the part to the correct size. I know it is possible to assign variables in centroid g-code, but can I requ...

I looked at that diagram, but it does not indicate if those are positive or negative signals. Can you let me know. I have ordered this:

There really isn't room in my case for the breakout board. I'll order some DB25 solder connectors. Any chance you know the exact wiring for that connector? Do I leave the +5v to the PUL+ and DIR+?

I got some guidance on the Facebook group. I connected +5v to the PUL+ and DIR+ and then the DR1 to DIR- and the ST1 to PUL- and everything worked.

AND

I had a DB25 breakout board, but my Beagle ate it... Seriously. He's a total spaz.

I am converting a machine that has been running on an an NVUM controller, Mach3, and uses TB6600s. The system was fully functional when I removed the NVUM controller. I have performed the bench test, have a heartbeat and connection with my PC. The limit switch LEDs illuminate when triggered and the ...