Search found 6 matches

by Nickles.charles
Mon May 02, 2022 5:50 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Was gifted a haas VF1, oak or all in one?
Replies: 1
Views: 589

Was gifted a haas VF1, oak or all in one?

Hello everyone, I was recently gifted a haas vf1 from I friend I bought some machines from. It has a few boards missing so it’ll need a retrofit. I’ve done an acorn lathe retrofit so this is not my first retrofit. It’s a 91 haas, and I’m still playing around with which board I want to use, all in on...
by Nickles.charles
Sat Jan 15, 2022 8:04 pm
Forum: Centroid Acorn CNC Controller
Topic: Blank Schematic page?
Replies: 3
Views: 766

Blank Schematic page?

Hello everyone, I'm about 94% done with my retrofit and I wanted to make some Schematics specific to this machine to have in the control box. I was looking for one but didnt see anything. Id just want to have a picture of the Acorn and have blank I could fill in as to what is actually connected to e...
by Nickles.charles
Sat Aug 21, 2021 4:33 pm
Forum: Buy, Sell, Trade
Topic: 2 clearpath SDSK-3411P-RLN servos
Replies: 0
Views: 4228

2 clearpath SDSK-3411P-RLN servos

Ive got two of these clearpath servos for sale SDSK 3411P-RLN. Both motors never mounted to machine and only used for a benchtest. Bought originally for one machine but I got for nothing a much better machine to retrofit. This new machine uses nema 23 and not these nema 34 so Id like to sell these. ...
by Nickles.charles
Fri Aug 20, 2021 2:50 pm
Forum: Centroid Acorn CNC Controller
Topic: Clearpath sdsk, c86 board issues <lathe axis 1=Z, axis 2=X, resolved>
Replies: 5
Views: 2020

Re: Clearpath sdsk, c86 board issues

So I got it working, Though I don’t understand why it’s working. Let me explain. In order to get my second servo to move I had to plug it i to the Y axis and set that jumper to on. So my set up looks like this… Z axis on centroid= plug servo into X slot on C86 board X axis on centroid= plug servo in...
by Nickles.charles
Thu Aug 19, 2021 10:21 pm
Forum: Centroid Acorn CNC Controller
Topic: Clearpath sdsk, c86 board issues <lathe axis 1=Z, axis 2=X, resolved>
Replies: 5
Views: 2020

Clearpath sdsk, c86 board issues <lathe axis 1=Z, axis 2=X, resolved>

Hi there everyone, So I’m using clearpath servos along with the C86 board for what should be plug and play with acorn on a 2 axis lathe. This is my second C86 and it’s got a weird issue. Everything on the centroid side seems fine and it shows no errors, however jogging the Z actually moves the X and...