Centroid Community CNC Support Forum

Will update, if everything goes smooth and working. The one problem i am facing regarding db25, thats the signal are not comming there, but if i do enable db25 in wizard then all my settings i/o and everything vanished, thanks GOD i made a report. Well thanks marty and eng199. I dint know eng199 is ...

Lol, Just cut the pcb track and put a jumper there. Shot the jumper when you need relay. And marty and others for all of your kind information, the pwm signal comes in the ribbon cable too. I have alreday checked it we can use the ribbon cable as a pwm output, but you have to connect the common with...

Hi marty,
Actualy in my panel there is no space on db25 connector side, the duct is attached with it and i dont want to cut the duct, that is why i was thinking that maybe pwm is also availabe on ribon cable which is connected to output 2.

My simple question is that if i cut the wire which connect to relay 2, and after that i configure pwm enable in the wizard, so would the pwm signal come in that cut wire? Can i use that wire as pwm instead of using db25? NOTE: MY english is not good, i dont know my point is clear for you guys or no. 🤔

I know pwm is too fast for the relat and i dont want to use the relay, i just want to use that wire which goes to this relay after cut it from the relay. I am just asking, if i cut the ribbon cable which feed output 2 of the relay board so can i use use that ribon cable signal for pwm? Because i don...

Hi everyone, I have a simple question. I have read on the forum as well as on the internet that pwm is only available on ouput no 2 of db25 and common is also there. First question is, does the common of db25 is 5v or 24v or for both? The second question is, can i use the pwm output from the ribbon ...

Thanks chris, i got it now.
Thanks for the update.

;------------------------------------------------------------------------------ ; Filename: mfunc15.mac ; Description: Tool unclamp macro ; Notes: ; Requires: ; ; Inputs: ; ToolIsUnclamped IS INP2 ; ; Outputs: ; ToolUnclamp IS OUT8 ;-------------------------------------------------------------------...

As nigelo mentioned me on facebook regarding this parameter for the axis paired, but i think after reading cncsnw comment this line of code is useless for me, if i remove it so it will not effect anything (will try), because i think this line had never executed in any ATC attempt. One question what ...

Hi marty, Thanks for moved it here, regarding the report i am not at workplace here is 5 days off, i am just reading the code and manual and understanding everything. And also report doesnt matter because as i told i am not getting any error, just was confused about this line that what was the purpo...