Centroid Community CNC Support Forum

If you are intent on building your own control panel, you are going to need more inputs than Acorn has. You will need Ether1616 You have one encoder port. That is for a Spindle Encoder If you want to experiment that's fine and up to you. We can't tell you what to do. I would abandon the idea and bu...

Hi Marty i remember you told me about use only one PMG that is ok but for manual drive and move with axis can i use one PMG for come closer with tool and for manually constant drive use buttons and drive only one axis? i am here the buttons are connect in different way i am not familiar with any el...

tblough wrote: ↑Sun May 09, 2021 8:14 pm And you need the E6B2-CWZ1X encoder for the spindle. Acorn uses line driver quadrature encoders.

Hi Tom thank you for info

Hi Marty i remember you told me about use only one PMG that is ok but for manual drive and move with axis can i use one PMG for come closer with tool and for manually constant drive use buttons and drive only one axis? i am here the buttons are connect in different way i am not familiar with any ele...

proxy diagram and description has to be send separetly each has no more like 6 Mg but together ( picture in side destription list has 98 Mb ? why i have no clue
Marthy thank you for your help , regards ROMAN

Marthy i am not sure if all files you can open just let me know plese

q

Hi Marty las week i was little bit busy but i collect " i hope " all you ask me for draws of motors encoders + proxy also i make draws of my wish sub panel ( maybe not exactly in this layout ) but more or less meaby some function can be set up in main program like ( on screen ) but if is p...

Hi Marty i wrote your article about " we can't see what you see' to end :)) . and i understand your position in case like this , in this moment all this project about wiring is in my head and i still chance or replace there is easier for preparation ,looking on lot of videos how other guys buil...

Hi Marty how can i insert picture here? can you guide me please. Marty the draws of wiring you provide are very clear and i can work with it ,with out problem ,i do not understand how cooperate some eletronic system together there i need help and how to connect it. I will use NEMA 24 with encoder ma...