Centroid Community CNC Support Forum

I was just on you tube and came across the allin1 board but at 14:02 they talk about using the encoder port for lathe mpgs i wonder if this would work for the cheap mpg like I was talking about

Here's a photo of the DIN rail power supply and terminal blocks that I have on my test bench. The Acorn has a C86ACCP R2 adapter board to drive the ClearPath SDSK servo motors. (Note: I use Blue wires for +24VDC and White/Blue wires for GND.) test_bench.jpg Thats perfect mike......that's exactly wh...

In the S15033.DWG, note that the +24VDC connections are being used with the H2 header. When you use the H2 and H3 headers, the Step, Direction and Enable signals on the Acorn board SINK current. That means that you must have current to sink. The +24VDC connection is the SOURCE of that current. The ...

Looked at the the Stepper Online doc again it says you can use 5-24VDC. So instead of +5V you can use +24VDC from Acorn power supply for power without the use of resistors: stepper online drive.JPG Ok so you are saying try using the 24 volt from the Acorn and if successful add another and so on ? S...

Hey guys I have a question maybe someone out there can help . I am thinking ahead here and alot times that gets me in trouble but here it goes ... I am going to be wiring 3 drivers all cl86y from stepper online (https://www.omc-stepperonline.com/download/Y-serie-closed-loop-drivers.pdf )link to driv...

These are the pendants I am referring to "wired mpg pendant "

So all I would be able to do is jog ? No setting or cycle start , feed hold, is that what functions you are talking about ?

So I really didn't understand the final answer. Can you use a wired mpg pendant? Like the ones on ebay surely you can right?