Centroid Community CNC Support Forum

By the grace of the good Lord, I found the v4.64 zip file on my computer! Whew, loaded great!

I do have to original files from V4.64. can I find the wizard setting in these or maybe the report?

I need help! I have been running CNC12 Mill V. 4.64 and had a computer problem and had to reload windows. I have a report from V 4.64 but no screenshots of the wizard. I tried loading v4.82 and restoring the report, it says it was successful, but nothing updating the wizard. I don't have time to try...

HI all, I discovered what the issue was with my Z Axis drive. I have seen in other forums that folks have been experiencing the same issue with the CL86T/Y Drives. Per Stepperonline if you use a 24 VDC input voltage to the (+) control signal, a 2k Ohm resistor must wired in line on the (+) input or ...

Hi all, I need help. I was running a G83 cycle and all of a sudden my Z Axis moves in the + direction only when either a + or - direction is commanded. The led indicator in the Acorn board is red. I hve triple checked all connections with no luck. I am running a CL86T driver from stepperonline. Did ...

Hi all, Need some help. First I am a total noob! This is my first go at a CNC conversion. I have an Acorn controller running Stepperonline CL86T Driver with a Hybrid stepper. My Z Axis will only move in the + direction no matter If I select the Z+ or Z- Jog Button. It only moves in the positive (up)...