H004 is for the number of poles not hZ. A003 & A004 are set according the rated hZ for the motor. My mistake
I noticed in your draft that A062 is set too 83.3. How did you come up with that number?
Bill
Search found 86 matches
- Tue Feb 27, 2024 8:36 pm
- Forum: Centroid Acorn CNC Controller
- Topic: CNC Depot Spindle with Acorn and Hitachi WJ200
- Replies: 6
- Views: 444
- Sat Feb 24, 2024 3:09 pm
- Forum: Centroid Acorn CNC Controller
- Topic: CNC Depot Spindle with Acorn and Hitachi WJ200
- Replies: 6
- Views: 444
Re: CNC Depot Spindle with Acorn and Hitachi WJ200
I have the same setup and below are the parameter settings on the VFD. A001=01 (Frequency Source) A002=01 (Run Command Source) A003=400hz (Base Frequency) A004=400hz (use the rating on the nameplate) A061= 400.0hz (use the rating on the nameplate) A082=220VAC (use rating on name plate) B012=10 (Amp ...
- Tue Feb 13, 2024 8:45 am
- Forum: Centroid Acorn CNC Controller
- Topic: Z Axis Brake - Wiring Diagram and Mechanical Function
- Replies: 2
- Views: 227
Re: Z Axis Brake - Wiring Diagram and Mechanical Function
Wire the brake to one of the outputs and use a reverse bias diode to prevent any current from going back to the board. You also have to go into the wizard and setup the output for the axis that you are using the brake on, in your case Axis3BrakeRelease.
- Thu Nov 16, 2023 8:04 am
- Forum: Success Stories
- Topic: ATC/Auto Dust Shoe conversion
- Replies: 7
- Views: 3941
- Thu Nov 16, 2023 1:35 am
- Forum: Success Stories
- Topic: ATC/Auto Dust Shoe conversion
- Replies: 7
- Views: 3941
Re: ATC/Auto Dust Shoe conversion
Looks great, does your post processor calculate the height of the dust shoe to material? Thanks, Yes it does. I'm using Swiss's probe app with the ATC add-on that has a section to add a macro for what ever you want to happen before and after a tool change, which cncsnw wrote (thank you :) ). The du...
- Wed Nov 15, 2023 12:00 am
- Forum: Success Stories
- Topic: ATC/Auto Dust Shoe conversion
- Replies: 7
- Views: 3941
ATC/Auto Dust Shoe conversion
Over a year ago, I decided to convert my cnc router to an ATC. Along the way I saw a video that showed a ATC with a auto dust shoe, so why not give it go. This is a new hobby for me and it's been quite a learning experience, building a control cabinet along with separate cabinet for the VFD and a fe...
- Tue Nov 14, 2023 11:14 pm
- Forum: Centroid Acorn CNC Controller
- Topic: sample g code and/or intercon files that i can include with the CNC12 installer
- Replies: 9
- Views: 688
Re: sample g code and/or intercon files that i can include with the CNC12 installer
Here's a couple pf pic's of a box I just made, not sure if this something your looking for. I used Vectric software to generate the code, worked fine.
https://photos.app.goo.gl/L1EiGM4WVkuYGo8eA
https://photos.app.goo.gl/L1EiGM4WVkuYGo8eA
- Wed Nov 01, 2023 7:49 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: Centroid CNC12 v5.07 REV12 BETA is now available.
- Replies: 35
- Views: 8281
Re: Centroid CNC12 v5.07 REV12 BETA is now available.
I've had the same issue with the MPG (MPG-6)... set to the smooth response.
At times, using the hand wheel, there is bit of a delay and jerky motion.
Bill
At times, using the hand wheel, there is bit of a delay and jerky motion.
Bill
- Thu Sep 28, 2023 1:10 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: Centroid CNC12 v5.07 rev8 BETA is now available.
- Replies: 43
- Views: 36537
Re: Centroid CNC12 v5.07 rev5 BETA now available for download and testing.
Seems as though the error was one time event. No longer get the error message
- Thu Sep 28, 2023 8:16 am
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: Centroid CNC12 v5.07 rev8 BETA is now available.
- Replies: 43
- Views: 36537
Re: Centroid CNC12 v5.07 rev5 BETA now available for download and testing.
Getting a 501 Error at start up, which stops loading cnc12, but will load cnc12 when I try a second time. Doesn't appear to be any other issues.
Bill
Bill