Centroid Community CNC Support Forum

H004 is for the number of poles not hZ. A003 & A004 are set according the rated hZ for the motor. My mistake
I noticed in your draft that A062 is set too 83.3. How did you come up with that number?

Bill

I have the same setup and below are the parameter settings on the VFD. A001=01 (Frequency Source) A002=01 (Run Command Source) A003=400hz (Base Frequency) A004=400hz (use the rating on the nameplate) A061= 400.0hz (use the rating on the nameplate) A082=220VAC (use rating on name plate) B012=10 (Amp ...

Wire the brake to one of the outputs and use a reverse bias diode to prevent any current from going back to the board. You also have to go into the wizard and setup the output for the axis that you are using the brake on, in your case Axis3BrakeRelease.

Few more pics of the Dust Shoe.

https://photos.app.goo.gl/TGVWv32Ecaay3AiB6

Looks great, does your post processor calculate the height of the dust shoe to material? Thanks, Yes it does. I'm using Swiss's probe app with the ATC add-on that has a section to add a macro for what ever you want to happen before and after a tool change, which cncsnw wrote (thank you :) ). The du...

Over a year ago, I decided to convert my cnc router to an ATC. Along the way I saw a video that showed a ATC with a auto dust shoe, so why not give it go. This is a new hobby for me and it's been quite a learning experience, building a control cabinet along with separate cabinet for the VFD and a fe...

Here's a couple pf pic's of a box I just made, not sure if this something your looking for. I used Vectric software to generate the code, worked fine.

https://photos.app.goo.gl/L1EiGM4WVkuYGo8eA

I've had the same issue with the MPG (MPG-6)... set to the smooth response.

At times, using the hand wheel, there is bit of a delay and jerky motion.

Bill

Seems as though the error was one time event. No longer get the error message

Getting a 501 Error at start up, which stops loading cnc12, but will load cnc12 when I try a second time. Doesn't appear to be any other issues.

Bill