With M3 S3000 I am seeing 3.4 V at H8. Time to contact customer service.
Thanks for your help!
Search found 12 matches
- Fri Sep 29, 2023 8:55 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Sudden change in spindle speed?
- Replies: 2
- Views: 979
- Thu Sep 28, 2023 11:42 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Sudden change in spindle speed?
- Replies: 2
- Views: 979
Sudden change in spindle speed?
While running my mill I noticed a sudden change in spindle speed without changing any settings.
When I request max rpms, I am only getting 3.6 v at the H8 connector. I do not have the 0-5V
selected in the wizard, so I believe I should be seeing 10 V at the H8 connector. Report attached.
When I request max rpms, I am only getting 3.6 v at the H8 connector. I do not have the 0-5V
selected in the wizard, so I believe I should be seeing 10 V at the H8 connector. Report attached.
- Mon Sep 13, 2021 11:14 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Using H6 Output 2 for PWM to control Clearpath Servo
- Replies: 4
- Views: 1328
Re: Using H6 Output 2 for PWM to control Clearpath Servo
Hi Gary and Mike, Thank you for the feedback. If I can find a way to keep from having to "home" the W-axis, that may be my way to go. This servo will be rarely used. I do not plan on moving the mill head unless I have too due to the size of the part. The servo would remain at a constant sp...
- Mon Sep 13, 2021 12:30 am
- Forum: Centroid Acorn CNC Controller
- Topic: Using H6 Output 2 for PWM to control Clearpath Servo
- Replies: 4
- Views: 1328
Re: Using H6 Output 2 for PWM to control Clearpath Servo
Is there anyone on this forum who can answer this question?
Do you need more information?
Do you need more information?
- Thu Sep 09, 2021 10:02 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Using H6 Output 2 for PWM to control Clearpath Servo
- Replies: 4
- Views: 1328
Using H6 Output 2 for PWM to control Clearpath Servo
I have a RF-31 mill running Clearpath servos which are connected to H2 and H3 per the Acorn_rev4 Multiple Clearpath SDSK schematic. Everything is running great. I want to add a "independent" Clearpath servo to move the Mill head up and down the column by adding macros to the VCP. At first ...
- Tue May 18, 2021 10:49 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Scaling issue when importing .DXF
- Replies: 2
- Views: 877
Re: Scaling issue when importing .DXF
Hi Tom,
Thanks for guiding me in the right direction. It seems when Fusion 360 is exporting
from the cloud, the units are metric. The Fusion 360 forum has some suggestions
I will pursue.
Thanks again!
Thanks for guiding me in the right direction. It seems when Fusion 360 is exporting
from the cloud, the units are metric. The Fusion 360 forum has some suggestions
I will pursue.
Thanks again!
- Tue May 18, 2021 10:00 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Scaling issue when importing .DXF
- Replies: 2
- Views: 877
Scaling issue when importing .DXF
I exported a .dxf from Fusion 360. When I loaded it into
CNC12, the part was scaled. Original in Fusion 360 was 2 inch x 4 inches.
In CNC12 the part is 5 inches x 10 inches. Is there a way to correct the
scaling? (report attached)
CNC12, the part was scaled. Original in Fusion 360 was 2 inch x 4 inches.
In CNC12 the part is 5 inches x 10 inches. Is there a way to correct the
scaling? (report attached)
- Mon May 03, 2021 11:26 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Notepad ++ Compile issue (Resolved)
- Replies: 20
- Views: 8048
Re: Notepad ++ Compile issue
Tom,
That was the ticket! Thanks!!
Hi Keith,
I am not making any changes now. I was just setting up notepad++ for future use.
If I come up with a helpful PLC, I will be sure to share.
Thanks for asking!
That was the ticket! Thanks!!
Hi Keith,
I am not making any changes now. I was just setting up notepad++ for future use.
If I come up with a helpful PLC, I will be sure to share.
Thanks for asking!
- Sun May 02, 2021 9:07 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Notepad ++ Compile issue (Resolved)
- Replies: 20
- Views: 8048
Re: Notepad ++ Compile issue
Not sure. It is the console which is opened inside notepad++.
- Sat May 01, 2021 11:36 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Notepad ++ Compile issue (Resolved)
- Replies: 20
- Views: 8048
Re: Notepad ++ Compile issue
I did work through that bulletin. At number 10, is when I got the compile error.