Search found 35 matches

by ruirosa
Wed Nov 08, 2023 9:29 am
Forum: Centroid Acorn CNC Controller
Topic: Using a probe as a reference tool
Replies: 27
Views: 13312

Re: Using a probe as a reference tool

Hello
No the Quill is fixed in the Y axis ( is not motorized) , the quill only moves in and out manualy if we need to drill anything manualy.
So this way which would be the bettter method to make the tool set hight set up with the TT2?
Regards
Rui
by ruirosa
Wed Nov 08, 2023 6:50 am
Forum: Centroid Acorn CNC Controller
Topic: Using a probe as a reference tool
Replies: 27
Views: 13312

Re: Using a probe as a reference tool

Hello The machine is made in Switzerland. In fact Suntravel is wright the machine table moves X(left and right) and Z (Up and down) the axis are not misslabeled is just the way the machine was build. There are Hundreds os this machines in Europe including Portugal, where I am. If the axis move corre...
by ruirosa
Tue Nov 07, 2023 2:31 pm
Forum: Centroid Acorn CNC Controller
Topic: Using a probe as a reference tool
Replies: 27
Views: 13312

Re: Using a probe as a reference tool

Hello I am almost done with my Mikron CNC Mill retrofit . Watching the diferent videos from Centroid on Tool seting with a bed mill and with a kne. e mill using a probe. I can not reach to a conclusion wich metoh I should use. On my machine the table moves +-X and +-Z, the head (Tool) only moves +-Y...
by ruirosa
Thu Feb 23, 2023 11:41 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC 10 Mill v2.68 M400 (Non-Windows)
Replies: 18
Views: 2768

Re: CNC 10 Mill v2.68 M400 (Non-Windows)

Yes the encoder is belted to the spindle axis 1:1.
I already made the calibration procedur, measuring the analog output voltages at the spindle outputs.
I will repeat the calibration process and then give a feedback.
Regards
Rui
by ruirosa
Thu Feb 23, 2023 10:11 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC 10 Mill v2.68 M400 (Non-Windows)
Replies: 18
Views: 2768

Re: CNC 10 Mill v2.68 M400 (Non-Windows)

Since the encoder we listed had a delivery time of 6 monts, we decide to use an omron diferential with 2000 lines
that make 8000 cpr.
I also measured the spindle rpm with a laser rotation mesure psitol and in fact there is a 20% rpm diference betwen the mdi comand a nd the real rpm.
Regards
Rui
by ruirosa
Thu Feb 23, 2023 9:28 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC 10 Mill v2.68 M400 (Non-Windows)
Replies: 18
Views: 2768

Re: CNC 10 Mill v2.68 M400 (Non-Windows)

Hello
Herewith I am sending a new report made some moments ago.
Regards
Rui
by ruirosa
Thu Feb 23, 2023 7:13 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC 10 Mill v2.68 M400 (Non-Windows)
Replies: 18
Views: 2768

Re: CNC 10 Mill v2.68 M400 (Non-Windows)

Hello I inserted the comand M3s200. And took some screen pictures. The FW6 value shown is the correct. 200 (pic3). The spindle max. speed is set to 3000 rpm (pic2) i do not understand how the system is assuming max spindle speed 2800. Maybe the all rpm diference is due that fact. Where is possible t...
by ruirosa
Wed Feb 22, 2023 6:30 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC 10 Mill v2.68 M400 (Non-Windows)
Replies: 18
Views: 2768

Re: CNC 10 Mill v2.68 M400 (Non-Windows)

Hello
The 100% key is pressed and the light on.
I am sending a screenshot.
Regards
Rui
by ruirosa
Tue Feb 21, 2023 2:14 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC 10 Mill v2.68 M400 (Non-Windows)
Replies: 18
Views: 2768

Re: CNC 10 Mill v2.68 M400 (Non-Windows)

Hello I instaled the encoder at the mill spindle. Made the configuration procedure using the cnc program spindelbenchtest.cnc. It works well, only the rpm do not coincide with the mdi inserted comands. For example m3s100. the encoder spindel rpm value shown at cnc 12 is 80 rpm, m3s200. shows 160 rpm...
by ruirosa
Mon Jan 23, 2023 2:32 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC 10 Mill v2.68 M400 (Non-Windows)
Replies: 18
Views: 2768

Re: CNC 10 Mill v2.68 M400 (Non-Windows)

Hello I am ending the upgrade of the CNC mill Mikron WF31D. Since I had to give up on the gear box using a VFD to control the spindle rotation. The only way to mount an encoder is on the spindle shaft using a THROUGH HOLLOW SHAFT encoder. the selected model is: 100H-45-8000-ABN-R05-SC8. That should ...