Search found 45 matches

by JasonPORC
Tue Jul 13, 2021 2:55 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: OAK 4x8 Router Build with ATC
Replies: 33
Views: 9825

Re: OAK 4x8 Router Build with ATC

Thank you!!!! That’s is all SUPER SUPER SUPER HELPFUL!

I’ve got a call out to Mitsubishi support as well.

Yay! This gives me something to check and one more issue to check off the list.
by JasonPORC
Tue Jul 13, 2021 3:16 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Operator Control Panel
Replies: 8
Views: 3410

Re: Operator Control Panel

Newarkprecision wrote: Sun Jul 11, 2021 9:51 pm Here is my custom operator panel on ACORN
Wow! That’s beautiful!!! 👍🏾👍🏾
by JasonPORC
Mon Jul 12, 2021 9:00 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: OAK 4x8 Router Build with ATC
Replies: 33
Views: 9825

Re: OAK 4x8 Router Build with ATC

You have Parameter 256 = 1, suggesting you intend to use analog velocity mode. That would be my choice too, starting out. For that to work, however, you need to have non-zero gains in Kp, Ki and Kd; and ideally have a fairly large value (between 50 and 100) in Kv1. Try Kp = 0.01, Ki = 0.0005, Kd = ...
by JasonPORC
Mon Jul 12, 2021 3:13 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: OAK 4x8 Router Build with ATC
Replies: 33
Views: 9825

Re: OAK 4x8 Router Build with ATC

Thanks Marc!

I’ll give that a try in the morning! Thank you!!!!!
by JasonPORC
Sat Jul 10, 2021 5:21 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: OAK 4x8 Router Build with ATC
Replies: 33
Views: 9825

Re: OAK 4x8 Router Build with ATC

Good Day all! After a couple months off with "life", I'm back on this build and looking for some help. Again. Attached is both my wiring diagram for the servo drives, and also a fresh report. I have one servo hooked up to my Oak. No faults on the drive or on with CNC12. BUT... I'm not able...
by JasonPORC
Wed May 26, 2021 3:53 pm
Forum: Centroid Acorn CNC Controller
Topic: Spindle Encoder... Pros/Cons
Replies: 5
Views: 1782

Re: Spindle Encoder... Pros/Cons

tblough wrote: Wed May 26, 2021 3:50 pm Besides rigid tapping, encoder also enables feed per rev machining. That can be useful for setting up difficult materials or trying out new cutters.
YES! Thanks Tom. Thanks for chiming in!
by JasonPORC
Wed May 26, 2021 3:07 pm
Forum: Centroid Acorn CNC Controller
Topic: Spindle Encoder... Pros/Cons
Replies: 5
Views: 1782

Re: Spindle Encoder... Pros/Cons

1) is that spindle equipped with an encoder, or do you have a way to mount one? 2) if yes to mounting your own does it meet the Acorn specs? 3) is the encoder capable of same rpm as the spindle? 4). Why would you need rigid tapping in wood? I would purchase the encoder installed from the spindle ma...
by JasonPORC
Wed May 26, 2021 2:27 pm
Forum: Centroid Acorn CNC Controller
Topic: Spindle Encoder... Pros/Cons
Replies: 5
Views: 1782

Spindle Encoder... Pros/Cons

Hello there all! As I get a bit deeper into my retrofit, I thought I'd ask the opinions of you all. I will be upgrading the spindle on my router to a new 13HP, ATC with HSK63 taper. I'm debating if I should get the encoder as well? I'm asking a GENERAL question here. Yes, I know a person needs it fo...
by JasonPORC
Wed May 26, 2021 2:26 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Spindle Encoder... Pros/Cons
Replies: 1
Views: 972

Spindle Encoder... Pros/Cons

Hello there all! As I get a bit deeper into my Oak retrofit, I thought I'd ask the opinions of you all. I will be upgrading the spindle on my router to a new 13HP, ATC with HSK63 taper. I'm debating if I should get the encoder as well? I'm asking a GENERAL question here. Yes, I know I need it for Ri...