Search found 8 matches

by snortwheeze
Thu Aug 19, 2021 6:06 pm
Forum: Centroid Acorn CNC Controller
Topic: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Replies: 136
Views: 143247

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

I just downloaded it today. It’ll be this weekend before I can take my acorn board out of service to mount this mount.
by snortwheeze
Wed Aug 18, 2021 10:32 am
Forum: Centroid Acorn CNC Controller
Topic: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Replies: 136
Views: 143247

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Well ... Here is a bracket .... First kick at the can so to speak ... Attached is a Jpeg screen capture ... Take a look and let me know what you think .... I don't have all the pieces built yet on the CNC4PC board but the dimensions of the board and the hole locations are per the drawing sent to me...
by snortwheeze
Sun Aug 15, 2021 11:14 pm
Forum: Centroid Acorn CNC Controller
Topic: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Replies: 136
Views: 143247

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Dudes ... your in luck .... I can do your 3D CAD and make your bracket on a MarkForged print from a material called Onyx .... Strong and pretty high resolution at .100 mm thick layers ... That's .004" for you metric challenged people.... Can you give me a little input on the card ( website ) a...
by snortwheeze
Fri Jul 30, 2021 8:26 pm
Forum: Centroid Acorn CNC Controller
Topic: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Replies: 136
Views: 143247

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Yes, I did do that. I disconnected the Molex connections to the C86 board for the Y and Z motors and then set all axes on the C86 to OFF as well as the unused A axis I plan to individually check each axis this way and see what happens. I put in an email request to Arturo Duncan as well Another thou...
by snortwheeze
Fri Jul 30, 2021 1:11 pm
Forum: Centroid Acorn CNC Controller
Topic: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Replies: 136
Views: 143247

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Did you disconnect all the motors from the C86ACCP that you disabled except for the X that is still enabled?
by snortwheeze
Fri Jul 30, 2021 12:10 pm
Forum: Centroid Acorn CNC Controller
Topic: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Replies: 136
Views: 143247

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Centurion wrote: Fri Jul 30, 2021 12:09 pm Thanks for your quick reply,
I'll double check this .
Ron
10-4. Check the slave axis also. Whatever you’re not using, move the jumpers to disable.
by snortwheeze
Fri Jul 30, 2021 11:59 am
Forum: Centroid Acorn CNC Controller
Topic: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Replies: 136
Views: 143247

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

I just installed my C86ACCP and am experiencing the exact same scenario . Motors jog for a second or two after a reset and then a drive Fault appears on the screen of CNC12 but I noticed that there was no green led on the C86ACCP BOARD and no fault leds lit for the Drive connections. I'm using Mole...
by snortwheeze
Sun Jun 13, 2021 9:09 pm
Forum: Centroid Acorn CNC Controller
Topic: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Replies: 136
Views: 143247

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Please note, that like some others, I am a bit hesitant to use these boards until a proper solution to secure them is in hand. Would be nice if one of are users proficient with CAD and 3D printing could design and make some brackets for it. Anyone? Anyone? :D I'll have you covered! I'm going to be ...