Search found 22 matches
- Thu Aug 11, 2022 8:09 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CNC Crossroad
- Replies: 2
- Views: 960
CNC Crossroad
Hello, I’m at a crossroad in my CNC project and I’m looking for some advice going forward. I have retrofitted my Eumach MC800P with an Oak controller and the add1616 card still using the Siemens Simodrive 611 analog VFD and servo drive and the Siemens 1.8kw (11 Nm) servos that I have fitted the Cent...
- Wed Feb 23, 2022 5:48 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: SIMODRIVE 611 system on VMC
- Replies: 2
- Views: 845
Re: SIMODRIVE 611 system on VMC
you can use an OAK controller and change out the encoders and run the simodrive 611. I've done it on mine and it works just fine.
- Mon Jan 31, 2022 3:32 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Keep SimoDrive 611 ?
- Replies: 13
- Views: 3087
Re: Keep SimoDrive 611 ?
Two separat encoders per axis. I only changed out the 500 line that was hooked up to the heidenhain 407 controller with the 10000 line hooked to centroid oak. The encoder going the the simodrive is only there for the pid reference to the drive, thats my understanding anyway. I did not changed anythi...
- Tue Jan 25, 2022 10:47 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Keep SimoDrive 611 ?
- Replies: 13
- Views: 3087
Re: Keep SimoDrive 611 ?
I did change out my 500 encoder with a 10000 encoder from centroid. Was told that 500 line was to little.
- Tue Dec 14, 2021 8:01 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Keep SimoDrive 611 ?
- Replies: 13
- Views: 3087
Re: Keep SimoDrive 611 ?
I did keep mine and got it working good so far. I did change the main encoders on the servos. does yours have two encoders on the servos? one to the controller and one to the 611 drive?
- Wed Sep 08, 2021 7:32 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Help with Eumach MC-800P retrofiting to OAK.
- Replies: 20
- Views: 5010
Re: Help with Eumach MC-800P retrofiting to OAK.
20210907_222220.jpg So I'm starting to get good controll on the spindle and all the axis. The next step for me now is the ATC. I'm not to good on the whole programing thing, so i was wodering if someone was willing to write the program? I guess you will need a fresh report and some pics and maybe a...
- Wed Sep 08, 2021 7:22 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Spindle fan time on adjustment
- Replies: 10
- Views: 3337
- Wed Sep 08, 2021 5:50 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Spindle fan time on adjustment
- Replies: 10
- Views: 3337
Re: Spindle fan time on adjustment
Hi all, trying to find a way to make my spindle fan output 19 on oak run 2 minutes every 5 minutes. I’ve got it wired to my lube also and don’t want it constantly draining my air on my compressor. Is there a way to make this relay turn on for 2 minutes every 5 minutes or any other custom time confi...
- Fri Sep 03, 2021 5:43 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Help with Eumach MC-800P retrofiting to OAK.
- Replies: 20
- Views: 5010
Re: Help with Eumach MC-800P retrofiting to OAK.
I did have to swap the leads and now it all works. I have tuned the pid and run the machine test with no issues
- Fri Sep 03, 2021 2:46 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Help with Eumach MC-800P retrofiting to OAK.
- Replies: 20
- Views: 5010
Re: Help with Eumach MC-800P retrofiting to OAK.
Cant get it to run the program so i can start to tune it. The servo just run off and get a y axis position error.