Search found 11 matches

by PatF10
Sun Jan 29, 2023 6:02 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: allin1 conversion questions
Replies: 4
Views: 755

Re: allin1 conversion questions

So far things are running as expected and im working through the setup. I have a couple of questions. My mill is a bridgeport style with the variable speed head, high and low. I want the allin1 to control the spindle speed. does it make sense to just run the head in high and let the vfd control the ...
by PatF10
Mon Jan 23, 2023 8:31 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: allin1 conversion questions
Replies: 4
Views: 755

allin1 conversion questions

I im back on working on a anilam to all in one conversion after a year or two hiatus. I did my bench testing back then. I finally have my cabinet wired up and sent power to it last night. I noticed a steady humming coming from either the control board or the power supply. I cannot quite tell. Is the...
by PatF10
Wed Feb 24, 2021 10:39 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Anilam to Allin1 conversion
Replies: 20
Views: 8187

Re: Anilam to Allin1 conversion

Making a little bit of progress. Snowy and icy roads have delayed some shipments. But I think I have most of my hardware now. Will need to get everything mounted and start wiring. I’ve read some other posts about single limit switches. My x and y only have one switch for both directions. I may try t...
by PatF10
Wed Feb 24, 2021 10:20 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Only 1 limit switch
Replies: 14
Views: 5219

Re: Only 1 limit switch

I’m not complaining, just trying to get it to work. Can someone post a limit switch link and I’ll buy some more switches Thanks So like he said, what is the schematic for running it this way temporarily. I also have an anilam conversion. My mill is setup with one switch. I will likely move to two b...
by PatF10
Mon Feb 15, 2021 4:21 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Anilam to Allin1 conversion
Replies: 20
Views: 8187

Re: Anilam to Allin1 conversion

Had some other projects come up, should be getting back into this in the next week or two. I did get the bench test completed and all that seemed to work as expected.
by PatF10
Thu Jan 21, 2021 5:00 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Anilam to Allin1 conversion
Replies: 20
Views: 8187

Re: Anilam to Allin1 conversion

freedommachine wrote: Mon Jan 18, 2021 7:58 pm
PatF10 wrote: Thu Jan 14, 2021 10:10 pm That setup makes it look fairly simple. What is the small black square below the line filter and above your contactor? I plan to reuse the transformer and i have a new cap from centroid coming. My all in one is supposed to be here tomorrow.
Freedom i sent you a PM
by PatF10
Fri Jan 15, 2021 8:34 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Anilam to Allin1 conversion
Replies: 20
Views: 8187

Re: Anilam to Allin1 conversion

I did the same conversion in 2019. Here's my cabinet (don't laugh). I reused the Anilam E-stop button and went with the 24v ac contactor recommended by Centroid. (Not pictured but located right above the cap). The 2 silver rectangular boxes are line filters that I reused from the Anilam. The VFD is...
by PatF10
Thu Jan 14, 2021 10:10 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Anilam to Allin1 conversion
Replies: 20
Views: 8187

Re: Anilam to Allin1 conversion

That setup makes it look fairly simple. What is the small black square below the line filter and above your contactor? I plan to reuse the transformer and i have a new cap from centroid coming. My all in one is supposed to be here tomorrow. How have you liked the all in one on your Anilam machine. I...
by PatF10
Thu Jan 07, 2021 4:12 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Anilam to Allin1 conversion
Replies: 20
Views: 8187

Re: Anilam to Allin1 conversion

Alright so I have been doing some reading and going over the drawings and instructions working my head around everything. IMG_5496.jpg There is the inside of my cabinet. Those are the current servo amps along the bottom. With the transformer in the corner with the bridge rectifier and the capacitor....
by PatF10
Wed Jan 06, 2021 5:22 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Anilam to Allin1 conversion
Replies: 20
Views: 8187

Re: Anilam to Allin1 conversion

So I started a list of components. my mill has a 2hp motor https://dealerselectric.com/L510-202-H1-N.asp VFD https://www.alliedelec.com/product/e-t-a-circuit-protection-and-control/4230-t110-k0ce-20a/70596477/ 120v 20A breaker https://www.ebay.com/itm/EATON-Cutler-Hammer-WMS2B30-Supplementary-Protec...