Search found 6 matches
- Tue Aug 16, 2022 7:57 pm
- Forum: Acorn CNC Plasma
- Topic: Centroid is releasing the second revision of the Plasma THC RX and TX boards
- Replies: 6
- Views: 7462
Re: Centroid is releasing the second revision of the Plasma THC RX and TX boards
Hi Do you have repair options??.... I have a THC_TX (gree board) that I was cutting samples and suddenly stop detecting the material.. We double check the wiring and is according to S15137.dwg, but when we inspected the board it seems like one of the resistor is burnout ...more specific R39. BR Fabi...
- Sat Aug 13, 2022 6:10 pm
- Forum: Acorn CNC Plasma
- Topic: New CNC Plasma tablet Build
- Replies: 8
- Views: 1814
Re: New CNC Plasma tablet Build
I set the step rate at 100 000 and lower the max rate to 300 and is getting very close to the actual reading .... I'm using a Digital Readout DRO from my lathe machine ..... here are some pictures...and the report file too.....
- Fri Aug 12, 2022 9:50 pm
- Forum: Acorn CNC Plasma
- Topic: New CNC Plasma tablet Build
- Replies: 8
- Views: 1814
Re: New CNC Plasma tablet Build
Hi Shawn I finished the wiring from the DB25 as the manual and the distance measured improved a lot, but still not getting the real distance....only in 1 inch the distance is very close (.998) but every one inch increment the distance moves a little bit more. for example at 10 inches move, the reado...
- Thu Aug 11, 2022 8:13 pm
- Forum: Acorn CNC Plasma
- Topic: New CNC Plasma tablet Build
- Replies: 8
- Views: 1814
Re: New CNC Plasma tablet Build
I thought that you can choose between DB25 or the headers. I'll try the DB25...
BR
Fabian
BR
Fabian
- Thu Aug 11, 2022 6:42 pm
- Forum: Acorn CNC Plasma
- Topic: New CNC Plasma tablet Build
- Replies: 8
- Views: 1814
New CNC Plasma tablet Build
Hi all I'm in the middle of making a cnc plasma table (5X10) for the shop.. The Frame is made of 2.5 steel profile. except for the raiser of the gantry they are made of aluminum. The gantry is made of 14 Gauge metal sheet (laser cut and bend). I'm using 20 mm linear rails in both axes X and Y. for t...
- Wed Aug 10, 2022 11:18 pm
- Forum: Acorn CNC Plasma
- Topic: DIY CNC Plasma retrofit to Centroid Acorn Plasma
- Replies: 9
- Views: 3156
Re: DIY CNC Plasma retrofit to Centroid Acorn Plasma
Hi
Would you share the settings for the Step/Rev and how is your stepper driver configured??? in terms of micro stepping and current. I have similar setup using Avid Rack and pinon system with nema23 stepper but still can't find the right settings???
Would you share the settings for the Step/Rev and how is your stepper driver configured??? in terms of micro stepping and current. I have similar setup using Avid Rack and pinon system with nema23 stepper but still can't find the right settings???