Centroid Community CNC Support Forum

Also the configuration in cnc 12 .
Thanks .

Can you help by showing the way to wiring a simple tool touch off and a cheap chinese probe on my acorn . Maybe that will help a lot of DIY user that don't have to invest in a very good probe and mesuring tool device .
Thanks

hi on that wiring diagram of the asda-b2 I find some other ways of wiring the drive to acorn . that ways work now , and why it was not with the wiring you propose for the delta asd-b2 ?

Keith a question for you
on the db 25 connector where should I place my DI 1 PIN 9 ENABLE ON IT ?
ex for drive #1 db25 stp=2 dir=3 en1=10 or 1 or 18

Ok I find it , thanks.

Thanks Keigh The drive are brand new . What Pxx-xx number I have to change for the ratio .I would have send you a video but the site don't accept .mov . I there a other way to send you video , by PM or something else . Do you have number that can be input in to asda soft for a base ( to get started ...

CAN YOU HELP !!! It been 2 weeks that I received 1 reponse from Centroid each 2 days. I here in the dark.
Please do something with me .

I close the power supply , close the drive and evertything is to 00000 restart cnc12 , recove the reset , push the jog button and the motor start running non stop , i stop it by pushing to stop . a window open saying that all the home are set . first, all the home are unplug from the card . and Al00...

Delta manuel .

Keith
The delta drive is to factory reset.
Load the number (gain button section )
start cnc12.
try to move the axe , it move very fast ,reverse the movement and the drive stop .
drive show Al009