Centroid Community CNC Support Forum

Hello, I am a user of CENTROÏD ACORN and on this subject I would like to share with you my passion for 3D and you can watch my YouTube channel. I will post videos about my DIY router. You can subscribe and activate the bell to receive all the news. THANKS. https://youtu.be/OGrCRhfUujI?si=Be3sT9RN0tJ...

I did not change pc but we found the solution by changing the regional language to English and version 4.82 works.

thank you for his information, I will change PC and I will give you the result.. thank you all for your help
Daniel

I did a clean full install on another laptop with version 4.80 and the settings I captured on the screen. it does not work …. I read on the forum that another user had the same problem.

thanks but i also tested it on a recent pc with the recommended specs but the problem is the same.. i reinstalled the 4.64 version and it works fine.

I installed the new version 4.80 and the control panel does not appear.
this all worked with the previous vesion .
thank you fo your help>
daniel

hello, I cannot find in fusion 360 the centroid post processor to use the 4th axis.

I would like to modify the withdrawal stroke after the first touching of the limit switches. 1 / first touch of the limit switch then withdrawal of 2mm and retouch at slow speed. what parameter or macro should I change? Thanks for your help

in 2021 it is still not possible to see the work in 3D? I didn’t find it in CNC12.

Thanks Gary, I received and wired the acorn and it works.