Search found 16 matches
- Mon Jan 25, 2021 2:58 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Connecting torchheight controller proma150
- Replies: 3
- Views: 1605
Connecting torchheight controller proma150
Hi Marty and Keith, thank you for your previous assistance I have the router working very well and I now want to set up the table with the PROMA THC150 torch hight controller. Marty, I read your reply to me last year which was from Keith extract below, 2.) THC that is Integrated to the CNC style 1: ...
- Fri Jan 01, 2021 3:09 am
- Forum: Centroid Acorn CNC Controller
- Topic: First try machine won't run error codes
- Replies: 13
- Views: 4563
Re: First try machine won't run error codes
Hi Marty and Shawn ,SUCCESS. At last..... I would like to thank Both of you for answering my questions, they put me on the correct path the problem was as I thought but could not figure out how to do was . zero the work coordinates, show each Axis starting points, and put an imaginary tool in the ro...
- Thu Dec 31, 2020 3:09 am
- Forum: Centroid Acorn CNC Controller
- Topic: First try machine won't run error codes
- Replies: 13
- Views: 4563
Re: First try machine won't run error codes
Hi again Marty before I start thanks again for all your help. I thought the problem may have something to do with zeroing the coordinates but I could not zero them. I have looked at manual several times but very hard to find the specific answer to the question I will try your suggestions first thing...
- Wed Dec 30, 2020 3:01 pm
- Forum: Centroid Acorn CNC Controller
- Topic: First try machine won't run error codes
- Replies: 13
- Views: 4563
Re: First try machine won't run error codes
Thanks for the reply Marty, that's not the main problem at the moment the wingspan code I entered is in metric but nothing happens the machine will not run and gives all of those error codes running on a metric code. I will try again today but it will not run from the home position, if I jog to the ...
- Tue Dec 29, 2020 10:24 pm
- Forum: Centroid Acorn CNC Controller
- Topic: First try machine won't run error codes
- Replies: 13
- Views: 4563
First try machine won't run error codes
I tried to run a metric wingspan which I made with fusion 360. I had to make this is because everything seems to be in Imperial and not metric. Marty in one of his emails mentioned that you can change the code by inserting G 21 into the code to replace G20 but I have no idea where to actually change...
- Thu Dec 24, 2020 2:08 am
- Forum: Centroid Acorn CNC Controller
- Topic: Decimal point in the wrong place
- Replies: 8
- Views: 3656
Re: Decimal point in the wrong place
Thanks a lot for your help Marty and Swissi, you put me on the right track. I had to change the dip switches to 4000 and then put the same in the steps/revolutions and then the ratio of 4.992 which I calculated on Marty's spreadsheet. Now everything works perfectly it taught me a lot about the relat...
- Wed Dec 23, 2020 3:24 am
- Forum: Centroid Acorn CNC Controller
- Topic: Decimal point in the wrong place
- Replies: 8
- Views: 3656
Re: Decimal point in the wrong place
Thank you for your advice or change the ratio of the turns to decimal places it is now 24.96 that fixed the decimal in the wrong place. Marty also suggested that I enter a G code for a straight line and let him know what distance the machine moved. I still have to figure out how to write the G code ...
- Tue Dec 22, 2020 12:09 am
- Forum: Centroid Acorn CNC Controller
- Topic: Decimal point in the wrong place
- Replies: 8
- Views: 3656
Decimal point in the wrong place
Hi there, I have most of my CNC machine now working, the distance traveled is correct but the decimal point needs to shift two places to the left. I realize this is probably something simple but I have no idea how to change it. I took a clip from one of your other videos showing the readout with the...
- Mon Dec 07, 2020 3:18 pm
- Forum: Centroid Acorn CNC Controller
- Topic: How to connect Plasma torchhight controller?
- Replies: 16
- Views: 5852
Re: How to connect Plasma torchhight controller?
Hi Marty, Yes that is correct it does take control of the z-axis I had no trouble connecting all of the other electronics related to it but I am still not sure where to connect that particular wire to which terminal on the ACORN. Should I try asking Centroid directly . I tried asking their sales onc...
- Sun Dec 06, 2020 9:44 pm
- Forum: Centroid Acorn CNC Controller
- Topic: How to connect Plasma torchhight controller?
- Replies: 16
- Views: 5852
Re: How to connect Plasma torchhight controller?
Hi Marty,
Yes I realize that but any suggestions you could give on the connection would be very much appreciated no panic I'll get the router version all working first. Thanks again regards Bill
Yes I realize that but any suggestions you could give on the connection would be very much appreciated no panic I'll get the router version all working first. Thanks again regards Bill