Search found 24 matches

by MachineMade
Fri Nov 25, 2022 6:44 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Lathe turret missing tool changes
Replies: 10
Views: 1291

Re: Lathe turret missing tool changes

The "311 Waiting for memory bit #21 M101" message is simply a status update, not a warning or error. It means that the tool-change macro is waiting for the PLC program to report that the turret index is complete. If you were to add a cncxmsg.txt file that included two lines similar to thi...
by MachineMade
Fri Nov 25, 2022 4:33 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Lathe turret missing tool changes
Replies: 10
Views: 1291

Re: Lathe turret missing tool changes

Well the spool valve for the turret clamping has tremendous scoring. Hopefully this is the problem and not just a problem. Thank you again for your help!
by MachineMade
Fri Nov 25, 2022 3:21 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Lathe turret missing tool changes
Replies: 10
Views: 1291

Re: Lathe turret missing tool changes

Tool 2 seems to be the only one to move too far. And there is no clear pattern in the diagnostic board between the tools that sometimes don't index far enough and 2 which travels much too far. I will also pull the Turret locking solenoid and inspect for issues. Though any time I have had solenoid pr...
by MachineMade
Fri Nov 25, 2022 3:08 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Lathe turret missing tool changes
Replies: 10
Views: 1291

Re: Lathe turret missing tool changes

Thank you so much for your input! I purchased this machine already converted and 99% completed. Only small things like vfd tuning, adding work lights, touch screen and an update for ridged tapping have really been needed since I have owned it. I do need to change the brake resistor so I can improve ...
by MachineMade
Wed Nov 23, 2022 5:07 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: VFD, Low Spindle Torque (Mori SL1H Oak)
Replies: 13
Views: 3228

Re: VFD, Low Spindle Torque (Mori SL1H Oak)

Just noticing I never updated this. I did wind up installing drive wizard and building a cable with a Ethernet cable db9 break out adapter, to work with a db9 serial to usb adapter cable. All of which I had on hand from previous CNC and amateur Radio exploits. Drive wizard allowed me to monitor what...
by MachineMade
Wed Nov 23, 2022 12:32 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Lathe turret missing tool changes
Replies: 10
Views: 1291

Re: Lathe turret missing tool changes

Thank you for the reply. Hopefully I have now attached a report. Let me know if there is trouble viewing it. Every time I start thinking I am seeing a pattern that may indicate something my symptoms change slightly. In the I/O Diagnostic screen I have determined the following. Input Hall Effect Sens...
by MachineMade
Tue Nov 22, 2022 10:28 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Lathe turret missing tool changes
Replies: 10
Views: 1291

Re: Lathe turret missing tool changes

Spent half the day out of the shop fixing Dad's furnace. I seem to have made progress adjusting the collar with the reluctor wheel that the hall effect sensors read. To answer one of my own questions above. Yes the reluctor wheel can be quite far out with only one or even no sensors triggered in the...
by MachineMade
Mon Nov 21, 2022 10:48 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Lathe turret missing tool changes
Replies: 10
Views: 1291

Lathe turret missing tool changes

I am all of a sudden having problems with turret indexing on my Oak equipped Mori SL1H. At one point tools 1-5 would not index properly and then the symptom changed and it seemed like It works good if you index no more than 1 tool at a time but when it has to rotate any distance to the next tool it ...
by MachineMade
Fri May 27, 2022 5:05 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: VFD, Low Spindle Torque (Mori SL1H Oak)
Replies: 13
Views: 3228

Re: VFD, Low Spindle Torque (Mori SL1H Oak)

So after pouring over the exported parameters I found auto tune set the VAC for E1-08 and E1-10 to 2.9 and .5. I have returned them back to factory default and seem to have good results. Low current as seen on the drive wizard tool during the drill cycle that was faulting the drive before I began. I...
by MachineMade
Thu May 26, 2022 6:12 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: VFD, Low Spindle Torque (Mori SL1H Oak)
Replies: 13
Views: 3228

Re: VFD, Low Spindle Torque (Mori SL1H Oak)

Here is a better photo of the motor tag just for reference.