Centroid Community CNC Support Forum

never mind, I sorted it out

My computer self destructed, I down loaded 5.06 and it wont read 4.06 report. I need to reverse directions on some of the axes wizard won't let me edit the needed polarity I have manually reset most things but presently the polarity on the x is the only one which is correct. HELP I have to he3ad for...

evidently I did something wrong on all my searches on this topic, my apologies plenty of info out there

I am wondering if there is anything in the Acorn code that will allow a software debounce routine for a mechanical probe, if not is there any point to setting up a debounce circuit between the probe and the main board?

I w able to finally get a scan that produced some usable data, only had 40 or 50 unscheduled stops, but I got the full surface. I am now wondering if it is possible to have the data stored as a csv file. The data was expressed as if it was a gcode file where the repeated unchanged data are not expre...

ok thanks, I'll check it out. the computer is in the same cabinet as the acorn and the dribes, should i move it to a different cabinet?

been busy making things, got the video posted on you tube

report_74E182A8108A-0319191774_2020-10-21_22-20-16.zip Here is the report I generated I took a video of the machine stalling or what ever it is it is doing. Unfortunately my phone and my computer don't seem to want to cooperate. as I said before, every thing seems to operate fine, it is just stoppi...

I tried shortening the shielded cable there was no difference, I did discover that when it stopped whether the the probe was tripped, or at the position to move to probe, or having just moved back from probe, if I switched the axis on the MPG unit, rotated the dial , pushed the cycle start button, i...

I digitized a hunk of scrap wood today to watch the leds on the board and see if there was any correlation between the pauses and the led signal. The pauses occur either when the probe is tripped, or when it is retraced before moving to the next position, I don't remember any pauses any where else. ...