Centroid Community CNC Support Forum

Hi I found how to configure Acorn servo motor screw terminal outputs. I went to my shop today, and I succeed in using the Wizard to configuring the system for screw terminals. Within the wizard, I did not expect to have to go into "DB 25 connector - mapping" to activate the screw terminals...

Hello regarding "Verify that you have the correct setting between screw terminal outputs and DB25 outputs in the Wizard." I'm using screw terminals, not DB 25 for servo motor outputs. I believe that I do not have screw terminals selected. However in the Wizard I can't find the screen where...

Subject was Servo motor stop working after update of CNC 12

In November of last year I did finally got my Bridgeport Boss CNC running perfect. It was retrofitted with an acorn controller running free CNC12 ver 5.?, DYN 4 servo drive, and 1.3 KW DMM AC servomotors it was running so great that I decided it was time to purchase CNC 12 Pro. Given that my shop is...

Keith My PC has returned from the Technician, Acorn 12, Wizard, and the PC configuration looks correct. I didn't get to speek with the Tech so I don't know what he did to correct my rebooting problem. I have included Screen shots as you requested, Note that the WYFI is off on my PC so I have not upd...

Keith As soon as I can get windows reloated I will send you my PC information. I had not completed the manual steps as outlined in TD309, because I had turned off WYFI, so I couldn't download 309. I decided to reboot before turning on WYFI, however the automatic steps to configure the PC with CNC PC...

Abouit a week ago I donloaded, installed and run CNC PC Tuner. After running the app and completing the PC configuration, and CNC 12 wizard, the PC would not shutdown, after waiting (maybe 5 minutes) it tries to reboot, gets to the owner page and locks up again, this process would not stop untill I ...

cnckeith Per my last post I have resolved Manual Spindle Start-Stop issue by uninstalling and reinstalling CNC 12 Mill version 5.02, followed by a complete system reboot. At this point the only remaining known problems are with the Virtual Control Panel. Missed Cooling, Flood Cooling, and Limit Swit...

Uwe and CNCSNW I went to my shop today to work on the Brake / VFD problem. I opened Wizard to ensure all Inputs and Outputs were properly defined. I open the I/O tables and verified that the Brake and the Spindle Forward and Spindle Reverse commands were in the proper output location. Then I went th...

Thank You Uwe
I'm heading to the shop at about an hour and should have better information when I return.
Regards,
Steve