Search found 3 matches
- Sun Sep 04, 2022 3:07 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Acorn 4.62 - JTech Laser 7w (with scott's lightburn workflow)
- Replies: 19
- Views: 7714
Re: Acorn 4.62 - JTech Laser 7w
Hello Peter, welcome aboard. I have a 7watt JTech and use VCP/Aspire with the laser plugin, and I've made a custom post for Aspire that has been working well. You're welcome to try it. It's customized for what I wanted it to do, but can easily be edited to suit. It limits the Z movements, warns tha...
- Sat Feb 27, 2021 8:09 pm
- Forum: Centroid Acorn CNC Controller
- Topic: ProbeApp V2: The ultimate solution for Tool Height Offsets
- Replies: 55
- Views: 34049
Re: ProbeApp V2: The ultimate solution for Tool Height Offsets
Sorted, my distance/turn was off on my z-axis. I knew it was something simple.
- Sat Feb 27, 2021 7:35 pm
- Forum: Centroid Acorn CNC Controller
- Topic: ProbeApp V2: The ultimate solution for Tool Height Offsets
- Replies: 55
- Views: 34049
Re: ProbeApp V2: The ultimate solution for Tool Height Offsets
Swissi,
I'm having trouble getting z to set to 0 correctly on a corner plate. It I'm not sure where I'm going wrong. If after probing xyz, it goes to x0y0 great. If I tell it to go to Z0 it goes approximately 1/4" or 6 mm lower than the thickness of the corner plate. Any ideas?
I'm having trouble getting z to set to 0 correctly on a corner plate. It I'm not sure where I'm going wrong. If after probing xyz, it goes to x0y0 great. If I tell it to go to Z0 it goes approximately 1/4" or 6 mm lower than the thickness of the corner plate. Any ideas?