Centroid Community CNC Support Forum

Great ! Clean work!

Any progress on this Retrofit Kris?

Putting the Oak logic power supply behind the Oak is a perfectly reasonable installation; but do it so that the screw terminals are visible and accessible. I usually mount them so that the terminals stick out about 1/2", between H2 and H3.



For much the same reason as Marc, I shortened the ...

20 feet outside, 3-5 feet inside

In stock!

Has Centroid worked on a macro for this. I see in milling where you use a probe. I think in plasma if the macro vcp button marks each corner of selected axis ie: y+ / y- it then can use the those button pushes to emulate the " probing " in mill.

https://photos.app.goo.gl/tnLY9RGycZ51N6f68
Specs:
Centroid Acorn Plasma controller & THC (Black Rx & TX )
Yaskawa Sigma 5 drive paks with 750watt servos (gantry 300lbs)
10:1 reduction
2 enclosures bolted back to back, low voltage panel 24x24x6, high voltage 24x24x10
Nema1 UL approved sourced from ...

Keep us updated with the build please!

So far plasma table seems to be running great, THC seems to work beautify, I also love the fact that the work coordinates from the last time the machine ran and are saved this allows me to keep a job open in sheetcam to keep nesting parts on the same job that was something on the old systems that ...

Finally got my table up and running and I have to say I couldn't be happier. Here's what I have going on so far.

Some info on the control box, it is 20x16 and 8 inches deep I got it from amazon. As I stated before I really wanted the clear door to be able to look at the LED's on all of the boards ...