Centroid Community CNC Support Forum

Hi Cheers for the help with the ideas to check some how the smoothing was turned on don`t know how as i never use it .The magic of the forums all back to normal now.

Hi I was wondering if any one can help my machine seems to have developed a mind of it`s own when i run a program it does`nt follow the G code it does random things.It was fine the night before i`ve tried writing them in Fusion 360 and the built in Intercon with CnC12.When it`s supposed to face it ...

Parameter 348 needs to be set to 15, it is currently set to ZERO
Try that and let us know.

See Tech Bulletin 313: https://www.centroidcnc.com/centroid_diy/tech_bulletins/browse.php


Hi Marty thanks for the quick fix it`s all working again i don`t know how it changed not been in the parameter ...

Gixer,

do the axes move using the handwheel, if you switch the increment selector to the x1 (lowest) position?


Hi no they don`t everything else on the wmpg works but the axes switch but if i switch the axes switch to off you can see that works on the virtual key pad as i switch it to off then ...

cnckeith wrote: ↑Sun Mar 07, 2021 1:44 pm hi thanks. please post a fresh report.zip so i can see your settings and error messages.

Hi here`s my report hope it helps.

Hi here`s a video in the link let me know if it does`nt work.

cheers

The problem is converting it to go into fusion 360 after digitizing i have a very similar setup to yours i digitize ok but converting it i`ve not quite done yet but you can run it straight from the machine once digitized but there are a few drawbacks.

Hi All.
I`ve got a problem with my wireless mpg-4 everything works ok except the x,y,z on the dial,feed and spindle speed work ok on the dial but if i switch it to x,y,z the dial does`nt work but everthing else will move the x,y,z.If you need anymore info let me know thats the potention meter i ...

Yes it was the bottom part of the G28 command missing all working ok now .

if (words.length > 0) {
switch (method) {
case "G28":
gMotionModal.reset();
gAbsIncModal.reset();
writeBlock(gFormat.format(28), gAbsIncModal.format(91), words);
writeBlock(gAbsIncModal.format(90));
break;
case "G53 ...

I think i`m sorted now had part of the code missing from the Post Processor will be back if not that and i don`t know why it changed.