Centroid Community CNC Support Forum

Does anyone know how to setup a umbrella tool changer with centroid acorn. I'm unsure how I would both program the tool changer and how to control it's position. I would be also needing to run a 4th axis. I've seen people use servo to turn the tool changer position. If you could help point me in the...

Post Processor for generic 3-axis milling machine, DIY build needed for 3d experiences shop floor programmer. if anyone has a post processor for it I would like to know.

Someone sent me instructions when I got it that weren't quite right for my model but the one Marty sent was what I needed lucky I figured it out later the day I posted this the instructions were kinda miss leading at first I've never used a vfd so I figured all this is a good learning experience.

I also got my new encoder today it's a 3600 ppr it should work thank you guys for the information that really helped me

I got it fixed had to use vi there's a pinout on the vfd it's backwards to the other models for some reason

I changed vi to ai which I should have done but it still didn't fix my problem with the vfd not changing speed based on the voltage

Thank you for the help I was wondering why it didn't have the a- and the others

my problem is resolved one of the wires had a bad spot in it broken inside the cable

I tried the connection you said and the motor clicks and faults the drive im going to get a db25 connector tommrow and a cord to see if the drives are programed wrong