Centroid Community CNC Support Forum

Okay, looks like SigIn port 4 would be one to try, Pn055 (Pin 8) and set to 18.

Found another manual with better English. Trying to see if I can use the VFD setup similar to the other servo as spindle connections to set direction. As I read them, the analog sets the rpm and the direction is set via the VFD settings off the relay board? cn2 list.png dkNEW C.pdf JASD Servo Spindl...

Found another diagram that should help

Says i can connect the 220v single phase. Need to figure that out on the 3 lines in.

Yes using an Acorn.

Isn’t the direction the -10/+10 at “voltage directive”

I’m experimenting with a nema 42 servo motor for a spindle motor on my g0704 conversion. Working on the bench connection before tearing apart the machine. Going over the wire diagrams available.

Anyone familiar with this controller?

tblough wrote: ↑Tue Apr 19, 2022 4:15 pm Easy. Upgrade to 4.64.

That fixed it.

You guys rock!

JH

Made a new post for the DXF access issue
Thanks
JH

Got my pro license to work, now how to get the dxf import access?

Report attached.

Running 4.5 looks like.

Thanks
John H

Great video on how it works, thanks.

Also shows me the F8 button that doesn't show up.

I'll post a report this afternoon.

Thanks, JH