Centroid Community CNC Support Forum

Have an older PLC Board that cam out of my 3 axis Knee Mill when it was upgraded to a New Centroid All in 1 DC. It is mu understanding that the board was in working condition when it was removed, but it is being sold AS_IS. Feel free to message me with questions and I'll try my best to get you answe...

Here is my next question, I have the M400 console on a boom arm off of the machine. I was trying to "bench test" the ALLin1DC and make sure the software is installed and such. I hooked up a 110v power line to the logic power of the Allin1DC and that turns on and works as it should in the i...

Update: Thanks for the help everyone, In talking to my uncle, who has allowed me to put the mill in the corner of his shop, he has a step down transformer that I can use! Its an acme power T-79846-3S which I believe has a 75KVA rating which should be more than enough according to tblough's math. Any...

Tom, the schematics are uploaded they are the two files between the pictures, the m40-n3 file is the schematic of the old system currently in the electrical cabinet. And the s14610 file is the schematic for installing the allin1dc. Let me know if you cannot access the schematics.... Adding a step do...

Hi All, I am trying to install a Centroid Allin1dc system on a Supermax YCM-40 that use to have an older centroid system, which i believe was the M40-N3. The Machine has servo motors fro X,Y, and Z Axis, and has the M400 Control Console. Jeremy in the Centroid Support department has provided me with...